third-party

third-party
Year
1986

Overview

Zobian Controls of Wyomissing, Pennsylvania tried hard in 1986-87 to bring the mouse, then the symbol of the Macintosh and Atari ST

Year
1984

Overview

When the XL series arrived, its revised operating system broke a good deal of popular 400/800 software. Atari's answer was the

Year
1989

Overview

TOMS was a Warsaw electronics firm set up by Tadeusz Okoń and Marek Stolarski. The name comes from the initials of their names. It

Year
1983

Overview

Tech-Sketch was one of the busier light-pen makers for the Atari 8-bit in 1983-84. It sold several pens and built its own software

Year
1984

Overview

The Animation Station is a touch tablet from Suncom, the Illinois company best known to Atari owners for its joysticks. It's fu

Year
1994

Overview

The Speedy XF (also listed as XF Speedy) is an upgrade for Atari's last floppy drive, the XF551. It carries a 1994 copyright fr

Year
1986

Overview

The Speedy 1050 came from Compy-Shop in West Germany in 1986. Like the Happy, it replaces the drive's processor with a stronger

Overview

The Rana 1000 was one of the handful of US-made double-density drives that competed with the Atari 810 before the 1050 arrived. It

Year
1982

Overview

Percom Data of Dallas sold the first disk drive for the Atari that didn't come from Atari. The RFD40-S1 was introduced in March

Year
1996

Overview

The msc-IDE Controller is a hard disk interface for the Atari XL, designed in 1995-96 by two German students, Stefan Birmanns and M

Year
1986

Overview

The MicroFlyte ATC Joystick was made for one job: flying SubLogic's Flight Simulator II without wrestling with the keyboard. On

Year
1983

Overview

The MF-1681 came from Micro Mainframe of Rancho Cordova, California. In 1983 the company said it had been "the largest manufact

Year
1983

Overview

The Indus GT was the premium third-party floppy drive of the Atari 8-bit era. Instead of the simple 6507-based controller in Atari&

Year
1985

Overview

The ICEPIC connected a standard Centronics parallel printer to an Atari through a joystick port rather than the SIO bus or an 850.

Year
1984

Overview

The US Doubler was ICD's cheap and minimal answer to the Atari 1050's two big gaps: no true double density and a slow 19,20

Year
1984

Overview

The MIDIMate was one of the earliest MIDI interfaces for the Atari 8-bit. It came from Hybrid Arts, founded by Bob Moore, previousl

Year
1982

Overview

The Atari 810 reads one 128-byte sector, sends it, and then waits for the next one to come round under the head. The Happy 810 Enha