ICD US Doubler

Year
1984
Type
Upgrade
Category
Disk drive upgrade chip set (Atari 1050)
Manufacturer
ICD, Inc. (Rockford, Illinois)
Main circuit board of an Atari 1050 disk drive

Overview

The US Doubler was ICD's cheap and minimal answer to the Atari 1050's two big gaps: no true double density and a slow 19,200 bit/s serial link. Installing it takes two chips, a replacement firmware ROM and a 128-byte RAM, with jumper changes on some drives. The result reads and writes single-sided double density (256-byte sectors, 180 KB) and talks the high-speed UltraSpeed protocol, which ICD advertised as "54K baud". SpartaDOS, ICD's own DOS, was written to drive it. The protocol was later copied by Happy, Duplicator, Tygrys, TOMS and others and supported by many modern SIO devices, so "US Doubler compatible" became the closest thing the Atari scene has to a high-speed standard.

Specifications

Item Value
Introduced 1984
Parts Replacement 4 KB firmware ROM + 128-byte RAM chip (some drives need two jumpers moved)
Added memory 128 bytes at $0200-$027F (384 bytes total in the drive)
Formats SD 90 KB, ED 130 KB, DD 180 KB
High speed UltraSpeed, POKEY divisor $0A (about 52K)
Track buffer None. Speed comes from sector skew
Known firmware "© 1985 ICD, Inc. US Doubler rev. L" (CRC32 605B7153)
1986 price (Antic) $39.95, or $69.95 with SpartaDOS
Variants "1-4" chip (drive numbers 1-4) and "5-8" chip (5-8, handy with a RAM disk)

How it works

The extra 128 bytes sit beside the RIOT's own RAM, giving just enough room to hold a 256-byte sector without contortions. For high speed, the computer first asks the drive for its speed index with command $3F, which always returns $0A. It then sends commands at that rate. The firmware can only listen at one rate at a time, so it flips speed each time it receives a bad command frame. That means the first command after a speed change is ignored, and the computer is expected to retry.

Because the US Doubler doesn't buffer tracks, high speed only pays off on disks formatted with a high-speed sector skew. ICD added command $66 (Format Skewed), which takes a Percom block plus an explicit sector order. A disk with normal skew read at high speed is no faster, and a high-speed-skewed disk read at normal speed is slow. The drive also accepts the Percom configuration commands, but uses only the track count, sectors per track, density and sector-size bytes.

History

Antic's July 1985 DOS survey introduced the upgrade (misprinted there as the "LCD Doubler") as one of two hardware routes to true double density on a 1050, Happy's being the other. It described SpartaDOS as "specifically designed" for it, with I/O "2 to 4 times" faster than Atari DOS 2. The December 1986 Shoppers Guide stressed that the drive "can still be used in its normal single or enhanced density modes". Super Products' SuperMax, Innovated Software's IS Doubler and the modern 1050E Floppy Drive Turbo are all clones.

Using one today

  • Format with the right skew. Use the SpartaDOS (or SpartaDOS X) formatter with high speed enabled so new disks get the UltraSpeed interleave.
  • OS support. UltraSpeed needs a high-speed SIO routine. SpartaDOS has its own, and there are patched high-speed OS ROMs and PBI firmware (Jonathan Halliday's Incognito BIOS, for example, includes a PBI version of Matthias Reichl's high-speed SIO code).
  • Modern devices. UltraSpeed or US Doubler compatibility is built into APE, SIO2IDE, the sio2flip Flipper Zero app and the A8PicoSIO, among others. Disk images can be served at high speed without the original drive.

Credits