Speedy 1050
- Year
- 1986
- Type
- Upgrade
- Category
- Disk drive upgrade board (Atari 1050)
- Manufacturer
- Compy-Shop (Germany)
Overview
The Speedy 1050 came from Compy-Shop in West Germany in 1986. Like the Happy, it replaces the drive's processor with a stronger CPU, here a 65C02, and adds RAM and a large ROM. That gives true double density, whole-track buffering and Compy-Shop's own high-speed protocol. Compy-Shop's own products, mini-Bibo-DOS and the Bibomon monitor ROMs, were built to use "Speedy" high speed.
Specifications
| Item | Value |
|---|---|
| Maker | Compy-Shop, 1986 |
| CPU | 65C02 at 1 MHz |
| RAM | 8 KB buffer (8.25 KB total) |
| ROM | 8 KB program ROM space (another account gives 16 KB of ROM in total) |
| Formats | SD 90 KB, ED 130 KB, DD 180 KB (Percom compatible) |
| High speed | "Speedy" protocol, about 55K, needs supporting software |
| Code upload | Yes |
| Track buffering | Read and write |
Models
There's a whole range of variants:
| Variant | Description |
|---|---|
| Speedy 1050N / NE | Internal / external add-on |
| Speedy 1050T / TE | Internal / external with a track-number display |
| Mini-Speedy N | Internal, no extras |
| Mini-Speedy D | Adds 8 KB mini-Bibo-DOS in ROM |
| Mini-Speedy S | Adds an 8 KB sector copier in ROM |
| Mini-Speedy DS | Both, selected by switch |
| Super-Speedy (prototype) | DS plus track display and a 192 KB RAM buffer |
The full Speedy models offered optional write-protect and fast/slow switches. The system disk carried Speedy Test and a sector copier, and the Mini-Speedy disk added Speedy Backup, Speed Init, DiskMapper and an HSS copier. Martin Reitershan Computertechnik later sold Turbo-Speedy DC, which swaps mini-Bibo-DOS for its Turbo-DOS XL/XE, with new firmware and 24 KB of ROM space.
Software support
Speedy high speed isn't automatic. The software has to use it. Support came from several directions: - Compy-Shop's 16K-Bibomon board includes a mini-DOS with Speedy 1050 high-speed support, and the 25K Bibomon from Klaus Peters adds "universal Speedy 1050 high speed support". - Klaus Peters' Floppy 2000 drive is a Speedy 1050 clone with an extra 360 KB double-sided mode.
Known issues
There's a real-world timing quirk. The Speedy 1050's high-speed receive loop on the drive is slightly too slow for the byte rate of an NTSC computer. A Speedy that's perfect on a European PAL machine can give errors on an NTSC Atari at high speed, because of the roughly 1% clock difference between the two. If you see this, try normal speed or a PAL machine.
Using one today
- Reproductions exist: Jürgen van Radecke (tfhh) has produced the Mini-Speedy 1050 (2015) and Mini-Super-Speedy 1050 (2019).
- The Mega Speedy (Guus Assmann and Matthias Reichl, 2014) supports original 1050, Speedy, Super Speedy, Mega Speedy, 1050 Turbo and 1050 Duplicator modes out of the box. It can also emulate Happy, US Doubler, Super Archiver and SuperMax if you supply those ROMs, and it adds a Centronics printer port.
- Emulation. Altirra's release notes record Speedy 1050 step timing and buffered track reads in standard mode, and a separate Speedy XF drive type (the XF551 counterpart).
Credits
- Picture: A Mini-Speedy 1050 board with its fast/slow switch. — Photo from Gury's Atari 8-bit Forever portal (Mini-Speedy) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.2.2 and 7.1.2 — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra Hardware Reference Manual, section 10.5 (drive characteristics, NTSC/PAL incompatibilities) — Avery Lee (Altirra)
- Altirra emulator release notes — Screenshot from Avery Lee's Altirra page, virtualdub.org
