Tech-Sketch Light Pens

Year
1983
Type
Peripheral
Category
Light pens and light-pen software
Manufacturer
Tech-Sketch

Overview

Tech-Sketch was one of the busier light-pen makers for the Atari 8-bit in 1983-84. It sold several pens and built its own software around them, unlike most rivals, which offered just a pen and a demo. There was a paint program (Paint-N-Sketch), a light-pen edition of Island Graphics' Micro Illustrator, and a string of point-at-the-screen learning programs for small children. Antic's September 1984 graphics survey found the Tech-Sketch pen "sturdier than other pens", made of plastic and metal with a small white button on the side of the shaft near the tip. It rated the pen easier to use than the switchless Edumate but not quite as easy as Atari's own CX75.

Models

Model Description
LP-10 Basic pen, no switch; sold with a demo cassette
LP-10S LP-10 with a switch; packaged with a demo cassette, later with Paint-N-Sketch Level I (cassette, disk or cartridge), later still with Micro Illustrator on disk
LP-15 High-resolution pen with a switch; same package history as the LP-10S

In 1984 Antic listed two packages: $39.95 with some BASIC programs on disk, and $69.95 with Micro Illustrator.

Software

Tech-Sketch's own titles, all driven by pointing the pen at the screen:

  • Paint-N-Sketch Level I and Level II (1983), drawing programs. Level I shipped with many LP-15 and LP-10S pens.
  • Micro Illustrator (light-pen version, disk), the Island Graphics paint program also sold with the KoalaPad and PowerPad.
  • Kinderware, a six-program collection: Math Fun, Alphabet Fun, Shapes and Colors, Memory Jogger, Connect-a-Dot and Simon Sez.
  • Math Fun for the Young Levels I and II, Alphabet Fun for the Young, Number Fun for the Young, Shape and Color Recognition (1983), Memory Jogger, Simon Sez and Word Search.

Most other Atari light-pen software works too, because all Atari light pens use the same hardware mechanism. That includes Futurehouse/Programmer's Institute titles, Stack's games and Atari's AtariGraphics (if you can find a cartridge).

How it works

A light pen has a photocell in its tip. When the CRT's electron beam sweeps past the point the pen is aimed at, the pen sends a pulse on its port's joystick trigger line. The Atari routes the trigger inputs to ANTIC's light-pen input, and ANTIC latches its beam-position counters into PENH (horizontal, colour-clock resolution) and PENV (vertical, two-line resolution). Software reads those registers and converts them to screen coordinates. PENH values run roughly 30-60 counts higher than GTIA's horizontal positions, which is why every light-pen program needs calibration.

The switch on the LP-10S and LP-15 is how you tell the program to draw or select. Switchless pens, such as the LP-10 or Futurehouse's Edumate (which used the START key), need some other way to signal a click.

Using it today

  • You need a CRT. Light pens sense the beam of a 50/60 Hz picture tube. They don't work on LCDs, plasma screens or 100/120 Hz CRT televisions.
  • Ports. On the 400 a light pen must go in port 4. On the 800, XL and XE any port works, and the software decides which one it reads.
  • Calibrate. Expect to run each program's calibration step. Positions vary between TVs and pens.

Compatibility

All Atari 400/800/XL/XE computers, using any software written for Atari light pens. Pressure-pad software, such as KoalaPad or Touch Tablet programs, won't work.

Credits