Innovative Concepts RAMdrive + Memory Upgrades
- Year
- 1987
- Type
- Upgrade
- Category
- Internal memory upgrade kits (600XL, 800XL, XE, XEGS)
- Manufacturer
- Innovative Concepts (I.C.), Warren, Michigan
- Tags
- memory-upgrade, ramdisk, 130xe-compatible, rambo, xegs, 600xl, 800xl, innovative-concepts, michigan, third-party
- Related
- AtariWriter, BASIC XE, Missile Command, PaperClip, SpartaDOS X, SpartaDOS
Overview
Innovative Concepts of Warren, Michigan was one of the busiest small Atari hardware firms of the late 1980s. Antic called it "a small company with an extensive line of 8-bit memory upgrades and related hardware enhancements". Its memory kits were sold under the RAMdrive + name. Each kit contained the RAM chips, a small custom logic chip, sockets, wire and resistors, plus a disk of RAM-disk handlers and utilities for the common DOSes. There was a kit for nearly every Atari from the 600XL to the XE Game System. The same company also made the ICX-85 keypad, the IC1050 Controller and IC Chip drive upgrades, the XF35 3.5-inch kit, the Easy-Scan scanner and RAM-Aid.
The range
| Kit | Computer | Result | Banking | Price (Antic) |
|---|---|---|---|---|
| RAMdrive + 64K | 600XL | 16 KB → 64 KB, runs all 800XL software | — | $24.95 (1987) |
| RAMdrive + XL to XE | 600XL/800XL (64 KB) | 128 KB | 130XE, true ANTIC banking | — (1990) |
| RAMdrive + 128K | 65XE | 128 KB | 130XE, true ANTIC banking | — |
| RAMdrive + XL | 800XL | 256 KB | RAMBO XL compatible | $59.95 (1987) |
| RAMdrive + XE | 130XE | 320 KB | Atari Magazin/RAMBO-type | $44.95 (1987) |
| RAMdrive + 320K | 65XE | 320 KB | Atari Magazin/RAMBO-type | — |
| RAMdrive + 192K | 130XE | 192 KB | True ANTIC banking | $37.95 (1989) |
| RAMdrive + 576K | 130XE with the 320K kit | 576 KB | — | — |
| RAMdrive + XE-GM1 | XE Game System | 64 KB → 128 KB, "100% compatible with the 130XE" | True ANTIC banking | $34.95 (1988) |
| RAMdrive + XE-GM2 | XEGS with XE-GM1 | 192 KB | True ANTIC banking | $34.95 (1989) |
History and reviews
The first kits (64K, XL and XE) appeared in Antic's New Products column in June 1987. The 256 KB 800XL kit came with two disks of RAM-disk handlers, source code, sector copiers and other utilities.
The XE-GM1 got a full review in August 1988. Matt Ratcliff installed it in his XE Game System, a 26-step job that took about three hours. The original RAM chips had to be desoldered, new sockets fitted, and two 41464 RAM chips piggybacked onto them. A 16-pin custom chip was stacked on U13, resistors wired to the PIA, and fly-wires run to the PIA, ANTIC, RAM and FREDDIE chips, with two FREDDIE pins lifted. His advice: test the original and new RAM chips separately before stacking them, leave a small gap between stacked chips for cooling, and use Kynar (Teflon-insulated) wire instead of the kit's wire, whose insulation melted. The kit shipped with DOS 2.5 and a full RAM tester by Glenn Smith of Radon Software. He "highly recommended" it, but only for experienced hardware hackers.
The XE-GM2 (reviewed October/November 1989) stacks a second pair of chips on top of the first for 192 KB. That's enough to copy a single-sided double-density disk in one pass with the included MyCopyR! 2.1 sector copier. The select line it uses also drives the XEGS's built-in Missile Command, so an optional switch drops the machine back to 128 KB when you want to play. The utility disk includes RAM-disk handlers for D2: through D7:, Atari's D8: handler for DOS 2.5, and notes on using the memory with SpartaDOS, MyDOS and AtariWriter Plus. PaperClip II and newer versions of SynCalc and SynFile+ recognise the extra RAM automatically.
The 192K kit for the 130XE (March 1989) adds a full single-density RAM disk, with handlers and utilities for DOS 2.0 and 2.5 and notes for AtariWriter+, BASIC XE, MyDOS, TopDOS, SpartaDOS and SpartaDOS X.
RAM-Aid
Big memory upgrades share a quirk: if you switch off and on quickly, the RAM can hold its contents, and the computer may not cold-start properly. You'd need to wait 10-20 seconds between power cycles. Innovative Concepts' RAM-Aid ($19.95) fixed this. It's a tiny circuit with a red push-button, mounted through a 1/4-inch hole in the case. Hold the button, press and release RESET, then let go of the button, and you get a clean cold start every time. It was available for the 800XL and 130XE and later for the XEGS.
Using it today
- Identify the scheme. A RAMdrive-equipped machine is either 130XE-compatible (128K and 192K kits), RAMBO-compatible (the 256K XL kit) or Atari Magazin/RAMBO-type at 320K. Run a memory tester or SysInfo to see what you have before relying on a RAM-disk driver.
- Check old solder work. These were hand-built piggyback installations. Reseat or reflow suspect joints and check for heat damage near the RAM sockets.
- XEGS switch. On an XE-GM2 machine, remember the switch position if Missile Command won't start or the extra 64K seems to be missing.
Compatibility
130XE-compatible kits work with all extended-memory software for the 130XE (DOS 2.5 RAM disk, BASIC XE, PaperClip, AtariWriter Plus). The 256K and 320K kits work with RAMBO-aware DOSes and handlers, such as MyDOS, SpartaDOS and SpartaDOS X.
Credits
- Antic Vol. 7 No. 4 (August 1988), RAMdrive + XE-GM1 review (Matt Ratcliff) — AtariMagazines.com (Kevin Savetz), 1988
- Antic Vol. 8 No. 6 (Oct/Nov 1989), Product Reviews: RAMdrive + XE-GM2 and RAM-Aid — AtariMagazines.com (Kevin Savetz), 1989
- Antic Vol. 6 No. 2 (June 1987), New Products: ICX-85 keypad, RAMdrives — AtariMagazines.com (Kevin Savetz), 1987
- Antic Vol. 7 No. 11 (March 1989), New Products: XF35 Kit, RAMdrive + 192K, IC Chip — AtariMagazines.com (Kevin Savetz), 1989
- Antic Vol. 8 No. 1, Antic Awards (Innovative Concepts) — AtariMagazines.com (Kevin Savetz)
- Antic Vol. 7 No. 7 (November 1988), Dr. Brilliant's Incredible Atari Brain Transplants — AtariMagazines.com (Kevin Savetz), 1988
- comp.sys.atari.8bit FAQ (Michael Current), section 6.12 memory upgrades (Innovative Concepts Ramdrive + list) — Michael Current (comp.sys.atari.8bit FAQ)
