Happy 810 Enhancement

Year
1982
Type
Upgrade
Category
Disk drive upgrade board (Atari 810)
Manufacturer
Happy Computing (Richard Adams); Happy Computers, Inc. from 1983
Atari 810 disk drive

Overview

The Atari 810 reads one 128-byte sector, sends it, and then waits for the next one to come round under the head. The Happy 810 Enhancement changed that. Antic's July 1983 review called the difference "like the contrast between mass transit and the automobile". The board adds RAM and a larger ROM to the drive, so on a read it pulls in the whole 18-sector track in about one revolution and serves later requests from memory. Loading roughly doubles or triples in speed, the drive motor runs less, and, because the drive can be sent new code, the Happy became the tool of choice for working with non-standard (copy-protected) disks.

Specifications

Item Value
Maker Happy Computing, San Jose, CA (Richard Adams); Happy Computers, Inc. from 1983
Introduced 1982
1983 price (Antic) $249.95
Versions HE810S-X (early 810s without data separator; includes one), HE810S-L (pre-Analog 810 with separator), HE810S-H (810 Analog)
Drive CPU Stock 6507 at 0.5 MHz
Memory 3 KB RAM, 4 KB ROM (3 KB visible); Rev 7: 6 KB bank-switched firmware
Track buffer One track, 18 sectors / 2,304 bytes
High speed Rev 7: Warp Speed read/write/put commands, data at 38,400 baud
Formats Single density only

History

The board plugs into the 810's side board. No soldering is needed, but chips have to be pulled and swapped. Early units came with the Happy Backup program (single drive), plus an 810 ROM emulator, Slow It Down and diagnostics. Multi-drive Backup, the Compactor and the Customizer (which creates non-standard disks track by track) were sold separately. From 1983 the bundle became Warp Speed Software 5.x, which added Warp Speed 5 DOS (built on Atari DOS 2.0S), a sector copier and a Tracer.

In 1986 the Version 7 upgrade kit brought the 810 up to date with the Happy 1050. A new chip in 2732 or 2532 form adds a slow/fast switch option, buffered writes, Happy 1050-style commands and true high-speed transfers. Later bundles (Rev 7, then 7.1) shared one 810/1050 disk with Warp Speed 7 DOS. Happy also sold Warp Speed DOS XL and Top-DOS 1.5 for Rev 7 hardware.

How it works

Antic's reviewer explained the trick. With the board fitted, a request for any sector reads its entire track into the buffer in "usually just 1.05 revolutions". Because programs usually read consecutive sectors, the next 17 are already waiting. Beyond reads, the board cut DOS formatting time by about a third and shortened the motor run-on. On older 810s it also brought the fast-format and data-separator improvements Atari had added in later production.

RAM sits at $0800-$13FF, and the top 2 KB of ROM is a relocated, patched copy of the 810 Rev C firmware. Reading or writing a "sector" number in the range $0800-$1380 actually transfers drive RAM. That's how Happy software uploads its own command handlers, marked with a fixed 9-byte signature at $0800. Rev 7 adds high-speed commands $70/$72/$77, a Quiet command, an H command for timeouts, alternate drive IDs and buffering modes, and multi-drive broadcast commands so one transmission can feed several Happy drives during mass duplication.

Using one today

  • Without Happy software running, the board behaves as a faster but otherwise standard 810, so ordinary DOS 2 disks work as before.
  • Warp Speed needs Rev 7 hardware plus a DOS or OS that speaks Happy's protocol. Antic's 1985 DOS survey compared ICD's high-speed SpartaDOS to "Happy Enhancement WarpDos in speed".
  • Spartan Software's Happy 810 Archiver was a separate product for Happy-equipped drives (rights later passed to ICD), and CSS sold a Super Archiver software package for it. RespeQt's SIO2PC software can emulate a Happy 810 Rev 5, so period Happy utilities can be run against disk images.

Credits