Indus GT Disk Drive
- Year
- 1983
- Type
- Storage
- Category
- 5.25-inch floppy disk drive (third-party)
- Manufacturer
- Indus Systems, Inc. (later Future Systems)
- Tags
- disk-drive, double-density, synchromesh, z80, cp-m, indus-systems, third-party, sio
Overview
The Indus GT was the premium third-party floppy drive of the Atari 8-bit era. Instead of the simple 6507-based controller in Atari's 810 and 1050, it had a 4 MHz Z80A microprocessor, front-panel push buttons (Error, Drive Type and Track), and single-sided double density (180 KB) as standard. It also ran Indus's own high-speed SIO protocol, Synchromesh. A 1986 RAM upgrade, the RAM Charger, let the drive run CP/M programs itself while the Atari acted as a terminal.
Club members used it heavily. A survey published in Antic by the Texas user group TACE named the Atari 1050 and the Indus GT as the two most popular drives among its members.
Specifications
| Item | Value |
|---|---|
| Maker | Indus Systems, Inc., Chatsworth, California; later Future Systems |
| Shipped | 1983 |
| Controller CPU | Z80A at 4 MHz |
| Drive RAM | 2 KB (64 KB with RAM Charger) |
| Firmware | 4 KB ROM, versions 1.00, 1.10, 1.20 |
| Densities | Single (90 KB), enhanced/1050 (130 KB), double (180 KB); single-sided |
| Disk controller | 1770/2797-family FDC |
| High speed | Synchromesh, 38.4 kbit/s; Synchromesh II with RAM Charger, 68.2 kbit/s |
| Percom block | Partial support (bytes 5-7 only) |
| Bundled DOS | DOS XL 2.20 or 2.30 (early units), DOS XL 2.35I1 (1984 on) |
History
Most units shipped with the "GT DrivingSystem" software bundle: GT Estate word processor, the Albert E. spreadsheet and GT Data Manager. The 1986-87 drives sold by Future Systems added GT Speller, a RAM130 RAM-disk driver for the 130XE, and INITSYNC.COM, which turns Synchromesh on during boot ("Super Synchromesh").
Antic's New Products column for February 1986 announced the RAM-Charger Module at $149.95. The card plugged into an internal expansion connector in the GT and added 64 KB of RAM. With a special BIOS, the drive's Z80 could then run CP/M applications. The kit included Atari-side terminal programs (a 40-column ADM-31 emulator and an 80-column ADM-3A emulator) and a CP/M BIOS or utility disk. To start CP/M, you load the terminal program on the Atari, insert the CP/M disk in the Indus, and press the drive's Error button while holding Drive Type. CP/M needs firmware version 1.20.
How it works
The 4 KB ROM sits at the bottom of the Z80's address space, the 2 KB of RAM at $7800, and the FDC and front-panel status ports are memory-mapped above them. The firmware handles nine SIO commands: read, write, put, status, read and write Percom block, format, format enhanced, and an Indus-specific Execute ($58) command. Execute uploads code to $7F00 in the drive and runs it. This is how the Synchromesh and Super Synchromesh loaders in GTSYNC.COM add working high speed, which the stock ROM doesn't provide.
Firmware versions
| Version | Notes |
|---|---|
| 1.00 | Listed in the field service manual; no dump known |
| 1.10 | Can't read sectors above 720 in enhanced density (sometimes mislabelled "1.4") |
| 1.20 | Fixes enhanced density and adds CP/M boot support |
The Indus service manual told technicians to upgrade any drive with ROM 1.00 or 1.10 to 1.20. Third-party ROMs appeared later. Rich Andrews' upgrade ROM, based on 1.20, claims a faster sector mode, 50% faster stepping, a 2.5-second motor timeout and no error beeps.
Using it today
- Check the ROM first. A drive still on 1.10 will fail on 1050-format (enhanced density) disks. A 1.20 or later ROM is the fix.
- Compatibility glitches. In Antic's I/O Board, one reader reported that Flight Simulator II would rarely boot on his Indus. The editors suggested checking drive speed and cleaning the head. Another reader cured the same problem by unplugging and reseating the SIO cables several times. Bad contacts are still the first thing to check.
- Modern RAM Charger clones. There are two later equivalents of the 64 KB RAM Charger: trub's SRAMCharger (2007) and Jürgen van Radecke's SRAM Charger (2018). Both enable Synchromesh II and Indus CP/M, and they also fit the Polish LDW Super 2000 and CA-2001 drives.
- Emulation. Altirra provides full drive emulation of the Indus GT, which runs the drive's own firmware, so you'll need an Indus ROM image. Its release notes mention ongoing work on the timing of this mode.
Compatibility
The GT reads and writes standard 810 single-density and 1050 enhanced-density disks, plus Percom-style double density. It answers the Percom configuration commands but honours only the density and sector-size bytes. Atari DOS 2.0S/2.5, DOS XL, SpartaDOS and MyDOS all work with it. Synchromesh needs its loader or a DOS that supports it. The LDW Super 2000 and California Access CA-2001 from Poland are compatible with the Indus and Synchromesh.
Credits
- Picture: The Indus GT, with its slim black case and front-panel controls. — Photo from Gury's Atari 8-bit Forever portal (Indus GT Disk Drive) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.2.5, 3.2.6 and 6.14 — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra Hardware Reference Manual (Avery Lee), sections 10.26-10.27 Indus GT — Avery Lee (Altirra)
- Antic Vol. 4 No. 10 (February 1986), New Products: RAM-Charger Module — AtariMagazines.com (Kevin Savetz), 1986
- Antic Vol. 5 No. 11, user group profile (TACE drive survey) — AtariMagazines.com (Kevin Savetz)
- Antic Vol. 6 No. 10 (February 1988) and Vol. 7 No. 1, I/O Board letters on Indus compatibility — AtariMagazines.com (Kevin Savetz), 1988
- Altirra emulator release notes — Screenshot from Avery Lee's Altirra page, virtualdub.org
