ICECO ICEPIC Printer Interface
- Year
- 1985
- Type
- Interface
- Category
- Joystick-port Centronics printer interface
- Manufacturer
- Integrated Computer Equipment Co. (ICECO / I.C.E.), St. Louis, Missouri
Overview
The ICEPIC connected a standard Centronics parallel printer to an Atari through a joystick port rather than the SIO bus or an 850. It came from Integrated Computer Equipment Co. (ICECO, or I.C.E.) of St. Louis and cost $49.95 in 1985. The hardware was just a compact box on a joystick cable with a 36-contact Centronics plug. The software was the point: a disk of drivers that emulated the Atari P: device and even the SIO printer protocol, plus ICEGRAF, a resident driver for screen dumps and fancy print effects. Antic's Eric Clausen reviewed it in February 1986: "I don't know of any other interface that offers so much versatility in controlling your actual print formats."
Specifications
| Item | Value |
|---|---|
| Maker | Integrated Computer Equipment Co., 8507 Natural Bridge Road, St. Louis, MO |
| Year | 1985 (Antic review February 1986) |
| Price | $49.95 (16K disk software) |
| Connection | Any joystick port (early drivers: ports 2 and 4 only) |
| Printer side | 36-contact Centronics plug; graphics support for Epson and Okidata and compatibles, text on any Centronics printer |
| Software | PHANDLER (P: handler), SIOSIM (SIO printer simulator), ICEGRAF (graphics/effects driver), REBOOT, CONFIGUR, RAMOS, ICECHK diagnostics, tutorial |
| Computers | 400/800, XL and 130XE |
The software
Because a joystick port isn't where Atari software expects a printer, ICEPIC drivers install themselves into the operating system:
- PHANDLER replaces the
P:device handler, so anything that prints through CIO goes to the ICEPIC. It came in 18 versions for different memory locations: low memory, high memory, the print and cassette buffers in page 4, and an XL version that replaced the OS cassette handler. Each version existed for all four ports. - SIOSIM simulates an SIO printer for programs that bypass
P:and talk to the printer through SIO, such as LJK's Letter Perfect. - ICEGRAF is the full-featured driver: print line, hardcopy toggle, form feeds, text screen dumps, graphics screen dumps (to printer or disk), shaded dumps, compressed, expanded and double-high print, rotated characters, underlining, margins and font selection.
- REBOOT lets you reboot into self-booting software with the driver kept in memory.
- CONFIGUR, added in later versions, picks, appends and renames the right driver for your machine, port and application. Ready-made configurations covered BASIC, AtariWriter, B/Graph, KoalaPad and Touch Tablet screen dumps, Print Shop and PaperClip.
On XL/XE machines a program called RAMOS copies the OS into RAM and patches it. The XL drivers then live where the cassette handler was, so they use no extra memory. The XL version of ICEGRAF even hides under BASIC and swaps itself in when needed. Because RESET would switch back to the ROM OS, RAMOS remaps SHIFT-BREAK to a system reset and holding any key plus BREAK to a reboot, keeping the driver alive. The ICEPIC master disk boots with a "BOOT ERROR" on purpose: you make a backup with DOS and save your chosen driver as AUTORUN.SYS.
Why use a joystick port?
Printing through a joystick port leaves the SIO bus free. Clausen pointed out that you could log a modem session straight to the printer while online, because the ICEPIC "doesn't share the SIO with the modem". He also argued that the bundled software alone was worth more than the interface, since buying separate screen-dump and print-effects utilities for another interface could easily cost more than $49.95.
Using it today
- Pick the right driver. Use CONFIGUR to build the version for your port, machine (400/800 or XL/XE) and program. XL drivers must be generated by CONFIGUR.
- XL/XE caveats. RAMOS only works with the standard Atari XL/XE ROM OS, not with translators or OS replacements, and it disables the cassette handler. Some programs that patch the OS themselves, such as PaperClip and Print Shop, need the special versions ICECO documented.
- Printer setup. Set the printer's 7/8-bit switch to 8-bit. Run ICECHK for your port to test the cable before blaming the software.
Compatibility
All Atari 8-bit computers with joystick ports (on the 400/800, ports 3 and 4 are also available). Graphics output is for Epson- and Okidata-compatible printers, and text works with any Centronics printer. It isn't compatible with programs that require an 850 or a true SIO printer, unless SIOSIM covers them.
Credits
- Antic Vol. 4 No. 10 (February 1986), Product Reviews: ICEPIC Interface (Eric Clausen) — AtariMagazines.com (Kevin Savetz), 1986
- ICEPIC User's Guide Addendum (ICECO, 1983/85), Internet Archive — Internet Archive, 1983
- comp.sys.atari.8bit FAQ (Michael Current), section 4.6 printer interfaces (ICECo ICEPIC) — Michael Current (comp.sys.atari.8bit FAQ)
- Gury's Atari 8-bit Forever: ICEPIC Interface (1985) — Gury (Atari 8-bit Forever portal), 1985
