Speedy XF (XF551 Upgrade)
- Year
- 1994
- Type
- Upgrade
- Category
- Disk drive upgrade (Atari XF551 controller replacement)
- Manufacturer
- Klaus Peters Elektronik + Software (Germany)
Overview
The Speedy XF (also listed as XF Speedy) is an upgrade for Atari's last floppy drive, the XF551. It carries a 1994 copyright from Klaus Peters Elektronik + Software in Germany. Most XF551 modifications swap the ROM or the mechanism. The Speedy XF goes much further: it removes the drive's 8048 microcontroller altogether and puts in a 1 MHz 65C02, a 6532 RIOT, 32 KB of RAM and 32 KB of ROM. The result works like the German Speedy 1050, with track buffering, the Speedy high-speed protocol and a drive-resident utility ROM. It keeps the XF551's double-sided mechanism, so it gains a 360 KB double-sided mode as well.
Klaus Peters also sold a complete drive along the same lines, the Floppy 2000: a double-sided Speedy 1050 clone with a 360 KB mode and a "Copy 2000" program in ROM.
Specifications
| Item | Value |
|---|---|
| Maker | Klaus Peters Elektronik + Software, (c) 1994 |
| Base drive | Atari XF551 (mechanism and WD1772 controller kept) |
| CPU | 65C02 at 1 MHz (replaces the 8048 running at 8.33 MHz) |
| I/O | 6532 RIOT, wired like the 1050's |
| RAM | 32 KB (about 16.75 KB of it mapped in normal use) |
| ROM | 32 KB: 8 KB main firmware plus two 8 KB utility banks; hardware can address 64 KB |
| Formats | SD 90 KB, ED 130 KB, DD 180 KB, double-sided DD 360 KB |
| High speed | Speedy protocol, about 55,500 bit/s (POKEY divisor 9) |
| Track buffering | Read and write |
| Code upload | Yes |
| Extras | Optional two-digit 7-segment track display |
How it works
The rebuilt controller is laid out much like a Speedy 1050. The RIOT handles SIO, the drive-select switches, motor and stepping, with step and direction pulses replacing the 1050's direct stepper-phase drive. The 1772 floppy controller sits at $0400, the RAM is split between low memory and $8000-$BFFF, and the top 8 KB of address space holds the main firmware at $E000. Two 8 KB windows hold utility code. A spare RIOT output (PB5) can switch the ROM's top address line, so a 64 KB ROM would work even though the stock firmware doesn't use it.
There's one hardware detail Speedy firmware needs. The XF551's 1772 reports "Motor On" in bit 7 of its status register, where the 1050's 2793 reports "Not Ready". The Speedy XF board uses a little discrete logic to substitute a drive-latch signal for that bit, so the firmware sees a 1050-style status. The 1772 keeps its 8.333 MHz clock to suit the 300 RPM XF551 mechanism. It now runs independently of the 1 MHz CPU, where the stock XF551 clocks both together.
Writes to $4000-$4001 drive the optional track display, one byte per digit, and a control latch at $4004 selects the second side.
Extended commands
On top of the standard and Percom commands, the firmware adds a Speedy-style command set:
- $41 / $44: modify the command table / change drive settings
- $4B: slow/fast configuration
- $4C / $4D: execute uploaded code without or with a reply
- $51: commit the write buffer to disk
- $60 / $62: write track / read track
- $68 / $69: fetch the length and body of the drive's own high-speed SIO routine, so the computer can load a matching driver
That last pair is a neat trick: software doesn't need its own copy of the high-speed code, because the drive provides it.
Using it today
A Speedy XF drive is a rare find, and it's mostly of interest to German-scene collectors and anyone who wants a double-sided drive that speaks the Speedy protocol. Practical points:
- DOS support. Speedy high speed needs supporting software, such as Compy-Shop's Bibo-DOS and Bibomon or other Speedy-aware DOSes and OS patches. A drive that hands its SIO routine to the computer makes this easier.
- Double-sided disks. The 360 KB mode is the XF551's double-sided mode carried over, so check that other drives you swap disks with use the same double-sided sector layout.
- Emulation. Altirra has a Speedy XF drive type with full firmware emulation, so you can try it without the hardware if you have a ROM image. Its hardware manual documents the memory map, RIOT wiring and command set.
Compatibility
- Reads and writes SD, ED and DD disks like a Speedy 1050, plus double-sided 360 KB disks like an XF551.
- Speedy high speed (about 55K) replaces the XF551's own 38.4K high-speed mode.
- The XF551 case, power supply and mechanism are unchanged.
Credits
- Altirra Hardware Reference Manual (Avery Lee), section 10.25 Speedy XF disk drive, drive and command tables — Avery Lee (Altirra)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.2.3 (XF Speedy) and 3.2.5 (Floppy 2000) — Michael Current (comp.sys.atari.8bit FAQ), 2000
- Altirra release notes (Speedy XF drive added) — Screenshot from Avery Lee's Altirra page, virtualdub.org
