LDW Super 2000 and California Access CA-2001

Year
1987
Type
Storage
Category
5.25-inch floppy disk drives (third-party, Indus GT-compatible)
Manufacturer
Logical Design Works, Inc. (Super 2000); California Access (CA-2001)
Beige California Access CA-2001 disk drive

Overview

Two late-1980s drives sold in Poland are essentially descendants of the Indus GT. The LDW Super 2000, from Logical Design Works, Inc., shipped in December 1987. Like the Indus, it had a 4 MHz Z80A, read single, enhanced and double density, and understood Indus's high-speed Synchromesh protocol. In 1988 it was replaced by the near-identical California Access CA-2001. Polish developers produced an unusually rich crop of ROM upgrades for them.

Specifications

Item LDW Super 2000 CA-2001
Introduced December 1987 1988 (replacement for the Super 2000)
CPU Z80A, 4 MHz Z80A, 4 MHz
Format SS SD/ED/DD (90/130/180 KB) SS SD/ED/DD
Compatibility Indus GT compatible, Synchromesh capable Indus GT compatible, Synchromesh capable
Bundled DOS DOS XL 3.25I1 (manual says "DOS XL 2.35L") DOS XL 2.35I1 (manual says "DOS XL 2.35L")

Upgrades

Firmware upgrades for these drives were a scene of their own. The known upgrades all fit both models:

  • Tygrys 2000 (2000T), by Marek Bojarski of Navitron (1989?). Version 1.1 adds US Doubler-compatible UltraSpeed (52.6 kbit/s) and Happy-compatible Warp Speed (38.4 kbit/s). It came with a large software set: Turbo DOS 2.9, a fast formatter, the TCopy universal copier, a bad-sector writer, a disk mapper, diagnostics, and an MS-DOS utility that reads and writes 180 KB PC disks. Version 2.0 adds 1050 Turbo ("Turbodrive") compatibility.
  • TOMS Turbo Drive LDW (1989). Adds an "IBM" 180 KB format (40 tracks × 9 sectors × 512 bytes) and Turbodrive compatibility, but drops Synchromesh. Ships with Turbo Kopier, a track copier and IBM DOS tools.
  • TOMS Multi Drive LDW (1990). As above, plus Happy Warp Speed and 1050 Duplicator compatibility and a suite of copy-protection tools (Track Master, Tracer, Weak Writer and others).
  • Atares Flash system (1991). Adds a unique 240 KB format (40 tracks × 6 sectors × 1,024 bytes) and a "Flash Turbo" mode at 127 kbit/s, with FlashDOS.
  • SRAMCharger by trub (2007) and SRAM Charger by Jürgen van Radecke (2018). Modern equivalents of Indus's 64 KB RAM Charger, giving Synchromesh II at 68.2 kbit/s and the ability to run Indus CP/M.

How it works

Because the hardware follows the Indus GT closely, the Indus internals apply in outline: a Z80 controller with ROM at the bottom of memory, a Western Digital-family FDC, and an "execute" command that lets the computer upload code to the drive. That upload facility is how Synchromesh, and later the RAM Charger's CP/M BIOS, get into the drive. It also explains how a simple ROM swap could add other manufacturers' protocols.

Using one today

  • Identify the ROM. An LDW or CA-2001 found today may run stock firmware or Tygrys, TOMS or Atares code. Each brings its own high-speed protocol and software. Trying the matching DOS or copier (Turbo DOS for Tygrys, FlashDOS for Atares) is one way to find out what's fitted.
  • Disk formats. Standard SD, ED and DD disks interchange with any Atari drive of matching capability. The 512-byte "IBM" and 1,024-byte Atares formats are specific to those upgrades, so treat such disks as needing the original drive and firmware.
  • CP/M. With an SRAM Charger fitted, the drive behaves as a RAM Charger-equipped Indus GT, and the Indus CP/M boot procedure applies.

Credits