Rana 1000 Disk Drive

Type
Storage
Category
5.25-inch floppy disk drive (third-party)
Manufacturer
Rana Systems
Rana Systems 1000 disk drive

Overview

The Rana 1000 was one of the handful of US-made double-density drives that competed with the Atari 810 before the 1050 arrived. It was single-sided, single and double density, with one unusual feature: standalone disk formatting. The drive could format a disk without the computer driving the job. It shipped with SmartDOS, the same menu-driven DOS that Astra Systems bundled with its own drives.

Little documentation for the Rana survives.

Specifications

Item Value
Maker Rana Systems
Format Single-sided; single density (810-compatible, 90 KB) and double density (180 KB)
Interface Atari SIO
Special feature Standalone formatting from the drive
Bundled DOS SmartDOS
Release date Not confirmed in the sources used here

History and reception

Antic's August 1984 disk-drive survey and its "Care and Feeding of Floppy Disks" article stated that a Rana couldn't format the back of a disk without a second timing hole punched in it. A reader wrote in, and Antic printed the correction in October 1984: "the back sides of all disks can be readily formatted with the Rana drive." So flippy disks work in a Rana without a hole punch, which matters for anyone archiving original two-sided Rana-era disks.

In July 1985 Antic's survey of DOS versions listed the Rana first among the drives (Rana, Indus, Trak, Percom, Astra) whose owners already had true 256-byte-sector double density. Atari wouldn't match that until the XF551. As late as May 1989 Antic's 8-Bit Power Tools column still named the Rana among the drives that users swapped flippy disks with, alongside the 1050, 810 and Indus.

SmartDOS

SmartDOS, as described by Antic in 1985, is DOS 2-compatible and menu-driven. It adds a status line showing each drive's density, a double-density sector copier, drive-speed and bad-sector checks, write-verify on/off, and switching a drive between single and double density. It works with Atari's own drives too, so a Rana owner's disks can be read elsewhere as long as they were written in single density.

Using one today

  • Single-density Rana disks are ordinary 810 disks. Double-density ones are standard 180 KB, 256-byte-sector disks, which most later double-density drives, SIO2PC software and emulators handle.
  • The standalone formatting feature means a Rana can prepare blank disks without the computer. That's handy when making a stack of work disks, but treat any disk you put in it as writable.
  • If you find the original SmartDOS master disk, image it. It's the companion DOS the drive was designed around.

Credits