I.S. Plate (Innovated Software 1050 Plate Enhancement)
- Year
- 1986
- Type
- Upgrade
- Category
- Disk drive upgrade (Atari 1050, British)
- Manufacturer
- Innovated Software (Robert Perry), Worthing, England
Overview
The I.S. Plate was a British upgrade for the Atari 1050, designed and built by Robert Perry of Innovated Software in Worthing on the south coast of England. Its manual also calls it the I.S. 1050 Plate Enhancement, ISP Plate and 1050 ISP. It's a single small circuit board that plugs into the 1050's CPU socket. On it are a 6502, an 8 KB firmware EPROM and 16 KB of static RAM, taking over from the drive's own 6507 and ROM. The result is an "intelligent" 1050 with true double density, whole-track buffering, optional buffered fast writes, US Doubler-style high-speed SIO, and emulation of the IS Doubler, the US Doubler, the Archiver chip and a plain 1050.
Perry had earlier made the IS Doubler, a US Doubler clone sold in small numbers, mostly locally. He started on the Plate around Easter 1986. Page 6's reviewer could find no trace of it in the American magazines; it was sold through Chips, an Atari specialist shop in Worthing.
Specifications
| Item | Value |
|---|---|
| Maker | Innovated Software (Robert Perry), Worthing, England |
| Released | 1986 (manual updated October 1987) |
| Price | "Near a hundred pounds" (1987) |
| CPU | 6502 at 1 MHz (replaces the 6507) |
| Firmware | 8 KB EPROM (4 KB used, at $F000-$FFFF) |
| RAM | 16 KB static: 8 KB for the firmware, 8 KB free for user code |
| Formats | Single (90 KB), enhanced (130 KB), double (180 KB) |
| High speed | US Doubler-style, about 52,600 bit/s, all commands |
| Track buffering | Read (default) and write (optional "fast write"), all densities |
| Emulation | IS Doubler, US Doubler, standard 1050, Archiver chip; Happy-compatible setup commands |
| Drives in one system | Up to 16 (drive number can be changed from software) |
| Installation | Plug-in, no soldering |
History and software
Page 6 magazine reviewed the Plate in its May/June 1987 issue. Ian Finlayson had bought a 1050 and the Plate after receiving enhanced-density disks his 810 couldn't read. He was won over by the drive's "speed and quietness" in the shop demonstration, and fitting it took him "well under 10 minutes". The board replaces the ROM and CPU, plugs into the CPU socket, and has a cut-out over a crystal so it can't go in the wrong way round.
The supplied flippy disk carried:
- The ISP driver (LightSpeed menu). It sets skew, fast write, verify, slow mode and write lock, and includes two high-speed sector copiers, one using 130XE memory. It can also switch the drive to IS Doubler or plain 1050 emulation.
- The IS Menu ("Lighter Menu"), a colourful multi-boot menu built on a special fast-loading DOS that only works with the Plate. Page 6 timed it at more than twice the speed of Multiboot XL.
- The IS Customiser, for building custom disk formats with mixed densities, bad, duplicate and extra sectors.
- A file loader, track tracer and diagnostic tester.
Early units needed the ISP Gremlin Grabber, sold separately. Most later units shipped with Gremlin Grabber II or III, and late units carried their software in ROM rather than on disk.
Page 6 found it "an excellent, innovative, well engineered product". The reviewer also noted that it gives little speed-up under DOS 2.5 but reads SpartaDOS disks about twice as fast, since that format suits the Plate's buffering.
How it works
The 6502's A15 line replaces the 6507's A12, so the drive's original hardware (RIOT and floppy controller) is mirrored through the lower 32 KB. The RAM sits in two 8 KB halves at $8000 and $C000.
- Track buffering. By default the drive reads a whole track at once, using the sector order it finds on track 0 for every track. A
$48setup command can select fixed 1050 or US Doubler sector orders instead. If the chosen skew doesn't match the disk, reading can be dramatically slower. Unlike the Happy 1050, the Plate doesn't keep a separate copy of sector 1 or look for the next sector under the head, so it's slower under SpartaDOS's frequent sector-1 reads. It also doesn't retry bad sectors while buffering. That makes it quick with copy-protected disks but less forgiving of damaged ones. - Fast write. When enabled, up to a track of writes is held in RAM and flushed later, with no verify. The buffer holds reads or writes, never both.
- High speed. Commands sent at about 52 kbaud (POKEY divisor
$0A) are accepted at high speed, US Doubler style. Command$3Freports the speed. - Custom formats. A
$23command takes a 128-byte block describing sector order, gap lengths and sync bytes, so software can lay down non-standard tracks. - Code upload. The documented
$A0(download) and$A1(run) commands let programmers put their own code in the drive. The download command checks the firmware's copyright message and hangs if it has been altered.
Using it today
- Switching it off. A handy trick, missing from the manual but noted by Page 6: power the drive up with a write-protected disk inserted (or an unprotected disk partly inserted) and it starts in plain 1050 mode. Power up empty for full Plate mode.
- Use the right skew. For best speed, format disks with the Plate itself or use the default auto-skew. Forcing a mismatched skew can make reads very slow.
- DOS choice. SpartaDOS and other UltraSpeed-aware DOSes get the most out of it. With DOS 2.5 the gain is small.
- Emulation. Altirra offers full emulation of the I.S. Plate, and its hardware manual documents every extended command.
Compatibility
- Standard 810 and 1050 disks, plus Percom-standard double density.
- US Doubler compatible, so UltraSpeed software works. Archiver emulation runs Archiver software.
- Happy-compatible device-ID and fast-write commands let some Happy-aware software, such as Warp Speed DOS, use those features.
Credits
- Picture: The I.S. 1050 Plate Enhancement manual (updated October 1987), with a drawing of the board. — Cover of the I.S. 1050 Plate Enhancement manual (Innovated Software, updated October 1987), from a scanned copy (Fair use (manual cover))
- Page 6 Issue 27 (May/June 1987), I.S. Plate review by Ian Finlayson — Ian Finlayson; page6.org, 1987
- Altirra Hardware Reference Manual (Avery Lee), section 10.22 I.S. Plate — Avery Lee (Altirra)
- comp.sys.atari.8bit FAQ (Michael Current), section 3.2.2 (1050 IS Plate, IS Doubler) — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra release notes (full I.S. Plate emulation) — Avery Lee (Altirra)
