Happy 1050 Enhancement (and Happy 1050 Maximizer/Controller)

Year
1985
Type
Upgrade
Category
Disk drive upgrade board (Atari 1050)
Manufacturer
Happy Computers, Inc. (Richard Adams), Morgan Hill, California
Atari 1050 disk drive

Overview

When Atari's 1050 replaced the 810, Happy Computers followed with a family of 1050 upgrades. The first, in 1984, was the Happy 1050 Maximizer, which added true single-sided double density (180 KB, Percom-compatible). A Happy 1050 Controller add-on followed, with a three-position write-protect switch and LED. In 1985 came the full Happy 1050 Enhancement. It replaces the drive's 6507 with a full 6502 and adds RAM, track buffering, uploadable code and Happy's Warp Speed high-speed protocol. It became popular enough to attract more than half a dozen clones and near-clones from Europe and the US.

Specifications

Item Value
Introduced 1985 (Maximizer and Controller: 1984)
Drive CPU 6502 at 1 MHz, replacing the 6507
Firmware 8 KB in two 4 KB banks; revisions 1 and 2
RAM Up to 6 KB extra (later boards use an 8 KB chip, 6 KB used)
Track buffer Up to 36 sectors (two tracks in single density)
Formats SD 90 KB, ED 130 KB, DD 180 KB
High speed Warp Speed 38,400 baud; Rev 2 also US Doubler-compatible UltraSpeed
Versions Upgrade for Maximizer-equipped drives, or full version for a stock 1050

In July 1985 Antic's DOS survey told 1050 owners there were "at least two hardware upgrades to true double density", made by Happy Computers of Morgan Hill and by ICD. It added that Happy 1050s also ran SpartaDOS's high-speed mode.

Software

Units from 1985-86 shipped with Warp Speed Software 6.x: Drive Options, Diagnostic, Sector Copier, Happy Backup, Compactor and Tracer. Rev 7.0 added 1050 Warp Speed DOS 2.0, and the combined 810/1050 Rev 7 and 7.1 disks followed. Rev 7.1 also included a PC File Transfer utility for the Happy 1050 that reads and writes 180 KB, 512-byte-sector "IBM format" disks. Warp Speed DOS XL and Top-DOS 1.5 were sold separately. In 1989 Innovative Concepts sold Happy Doubler, a software add-on giving UltraSpeed support and drive numbers D5:-D8:, and later the IC Chip replacement ROM.

How it works

The 6502 widens the drive's address space from 8 KB to 64 KB. The original 1050 hardware (6810 RAM, RIOT and FDC) appears at the bottom, mirrored through the lower 32 KB, with RAM from $8000 and the banked ROM at $F000. Revision 1 firmware is based on Atari's 1050 Rev K code; revision 2 picks up the FDC fixes from 1050 Rev L.

  • Track buffering is on by default. When a new disk goes in, the firmware scans track 0 to learn the sector order, then reads whole tracks in disk order. Buffering alone speeds up sequential single-density reads by about 25%, and the drive can stop its motor while still answering from memory.
  • High speed: commands $70/$72/$77 send the data frame at 38,400 baud. Rev 2 adds US Doubler-style speed, which turns on only after the computer sends the Get High Speed Index ($3F) command.
  • A Rev 2 bug to know about: with the default power-up settings, high-speed US Doubler-style writes corrupt the third byte of each sector. Turning on write buffering avoids it. SpartaDOS X does this automatically when it detects a Happy 1050, but other high-speed OSes may not.

Clones

Clones and near-clones include: Irata Verlag's High Speed Board 1050 (West Germany, 1985), Utility House's 1050 Lazer Enhancement (UK, 1986), CSS's Klone and Klone II (USA, 1986-87), the 1050 IS Plate from Innovated Software (with 16 KB of RAM and US Doubler/Archiver emulation), HF Developments' Hyper Drive 1050 (UK), and a modern "Happy Warp 1050 v7.1 Modernized Recreation".

Using one today

  • Use SpartaDOS X or another DOS that knows about the Rev 2 write bug before enabling high-speed writes.
  • The Controller's slow/fast switch disables track buffering in Slow, which is useful for timing-sensitive protected software.
  • Altirra emulates the Happy 1050 in full, and its notes record work on matching the board's memory map and contended regions. In standard mode Altirra also emulates buffered track reads. RespeQt's SIO2PC server can emulate a Happy 1050 Rev 7 for imaging real disks.

Credits