Hard Disks for the 8-Bit Atari: SASI, SCSI and ST-506 Drives

Year
1986
Type
Storage
Category
Overview: period hard-disk interfaces, compatible drives and controllers, and how they were used
Manufacturer
Various (SWP, William Lurie & Associates, Supra, ICD, Computer Software Services and others)
Green circuit board of an Adaptec ACB-4000-series hard disk controller, with Adaptec custom chips, an EPROM and an edge connector

Overview

From 1986, an 8-bit Atari could run a real hard disk, then a shoebox-sized metal case holding a 10 or 20 MB Winchester drive. In Antic's October 1986 hard-disk issue, Supra said most of its 8-bit SupraDrives went to BBS sysops. Developers and home-business users were the other early buyers. Antic itself kept every 8-bit program it had ever published on a 10 MB SupraDrive and still had about seven megabytes free. This page explains the two drive standards of the time, the interfaces that connected them to an Atari, and the compatibility rule that still trips up anyone reviving one. Modern owners mostly use IDE/CompactFlash or SD solutions instead (see IDE Plus 2.0, MyIDE or SIDE).

Two kinds of drive

ST-506 (MFM or RLL). Shugart Technology's 5 MB ST-506 of 1980, later Seagate's, was the first 5.25-inch hard disk. With the 10 MB ST-412 and 20 MB ST-225 that followed, it set the standard interface between drive and controller. An ST-506 drive has no intelligence of its own. It needs a separate controller board, which connects to the host computer's adapter. At the time, such drives were usually described by their recording method, MFM or RLL, rather than by the interface.

SASI and SCSI. Shugart Associates' parallel SASI interface became the ANSI SCSI standard in June 1986. Many SASI and SCSI drives have the controller built in. Others are ST-506 drives fitted with a bridge controller that presents them to the computer as SASI/SCSI devices.

The 256-byte-sector rule

Atari disk sectors are 128 or 256 bytes long, and most period Atari hard-disk interfaces need a drive or controller that can format 256-byte sectors. Drives known to work include the Seagate ST-225N (20 MB), the Rodime RO650 (10 MB) and RO652 (20 MB), and Iomega's Alpha 10H and Beta removable-cartridge drives. Suitable ST-506 bridge controllers include the Adaptec ACB-4000A and ACB-4070 (SCSI), the Western Digital WD1002-SHD (SASI) and the Xebec S1410/S1410A (SASI). The later CSS Black Box and the 2006 "new series" Multi I/O also accept 512-byte sectors, which opens up far more drives.

The interfaces

Interface Year Connects to Notes
SWP Host Adapter 1986 64K ATR8000 WD1002-HDO MFM controller and a 10 MB ST-412-class drive. Up to 32 MB, partitioned for MYDOS, CP/M and CO-POWER MS-DOS
Z-Tec 1000 — Inside a 64K ATR8000 SASI host adapter, 256-byte-sector controllers only
BTL 2004 1986 PBI (BTL 2001) or cartridge+ECI (BTL 2002) SASI, one or two drives up to 128 MB. Systems sold up to 85 MB with MYDOS 4. $550 for 10 MB in January 1988
Supra Hard Disk Interface 1986–92 PBI, with an XE adapter SCSI. D1: is a floppy-sized "fake floppy" and D3: the rest. The 20 MB SupraDrive sold for $699 in 1988
ICD Multi I/O 1987 PBI, with an XE adapter RAM disk plus SCSI for up to eight controllers. ICD's 20 MB FA-ST drive cost $699 in 1988
CSS Black Box 1989 PBI and cartridge+ECI SASI/SCSI with 512-byte support, up to 96 partitions, and later the ATASPI programming interface

The early Corvus system and the ADS Integrater for the 800 used other designs. Both are covered on their own pages.

Living with a 1980s hard disk

  • Partitions, not one big drive. Atari DOS 2 couldn't see a disk this large, so interfaces split it up. The SupraDrive gave a floppy-sized D1: that any DOS could boot, and a large D3: that only MYDOS (supplied) or SpartaDOS could use fully. You also needed a real floppy drive, set as D2:, for copying. ICD shipped the FA-ST as two 10 MB SpartaDOS 3.2d partitions of over 40,000 double-density sectors each.
  • Directories. SpartaDOS 3.x allows 128 entries per directory, so a large drive needs subdirectories. Antic's FA-ST reviewer recommended the SpartaDOS Toolkit's WHEREIS utility for finding files. MYDOS also offered subdirectories.
  • Formatting and parking. The Supra's format-and-verify pass took 10–20 minutes. Supra and ICD both supplied head-parking utilities, to be used before moving the drive. ICD's 50 MB units parked themselves.
  • Fragile by nature. Antic's "Inside a Hard Disk" explained why. The head flies on a film of gas so close to a platter spinning at up to 3,600 rpm that, scaled up, it would be "like flying a Boeing 747 six inches above the ground". A smoke particle or a bump can cause a head crash, so keep backups on floppy.
  • Incompatible add-ons. Antic warned that RAMrod and Omnimon OS boards would "severely damage" the SupraDrive.

Using one today

Surviving period interfaces still work, but the drives are the weak point. A small SCSI drive with 256-byte-sector support, or a bridge controller from the list above, is the key to reviving one. Emulators such as Altirra can emulate the Multi I/O with a virtual SCSI disk, so you can try the software side without risking an old drive.

Credits