ICD Multi I/O Board (MIO)
- Year
- 1987
- Type
- Interface
- Category
- Parallel-bus multi-function interface (RAM disk, printer, RS-232, SCSI/SASI)
- Manufacturer
- ICD, Inc. (Rockford, Illinois)
Overview
Antic's January 1988 Shoppers Guide called ICD's Multi I/O Board "the most impressive add-on product for the 8-bit in years". The MIO is an external box that plugs into the parallel bus of an 800XL (or a 130XE via a $19.95 adapter) and adds five functions in one go: - a large RAM disk with its own power supply, so its contents survive turning the computer off - a printer spooler - a Centronics parallel printer port - an RS-232 serial port with an 850-compatible R: handler in ROM - a SCSI/SASI hard-disk interface
Together with SpartaDOS, it turned an XL or XE into a serious bulletin-board or development machine.
Specifications
| Item | Value |
|---|---|
| Introduced | 1987 (manual Rev 5/20/1987; Antic first listed it for the 1986 holidays) |
| Connection | 800XL PBI; 130XE/65XE ECI via ICD adapter with two cartridge pass-through ports |
| RAM | 256 KB or 1 MB, self-refreshing with the unit's own supply |
| ROM | 16 KB: configuration menu, R: and P: handlers, hard-disk driver |
| Parallel port | DA-15 (same pinout and cables as the P:R: Connection/850); P1: or P2:, optional auto line feed |
| Serial port | DE-9, same pinout as 850 port 1; R: in ROM uses no computer memory; up to 19.2 kbit/s |
| Hard disk | 50-pin SCSI/SASI header, up to 8 controllers; 256-byte-sector controllers only |
| Registers | $D100-$D1FF and a 256-byte RAM window at $D600-$D6FF |
| Prices | $199 (256K) / $349 (1 MB) in 1986; 256K at $239.95 direct in late 1988 |
Setting it up
ICD's manual gives the power-up order as MIO first, then any hard disk, then the computer. Hold SELECT while booting (or press SELECT+RESET) to bring up the built-in menu. It loads into main RAM, so save your work first. From the menu you assign drive numbers to RAM-disk partitions and hard-disk partitions (up to eight drives in total), swap drives, write-lock them, set spooler size, printer type and port numbers, and set the baud rate, stop bits and parity for the serial port. The configuration is saved to hard drive 0. Because the RAM keeps its contents and any partition can be mapped to D1:, you can boot straight from a RAM disk.
Antic's October 1988 review of ICD's FA-ST 20 MB hard disk ($699) shows the setup in practice. ICD pre-formatted the drive as two 10 MB SpartaDOS 3.2d partitions with "over 40,000 free double density sectors" each. The MIO's drive remapping let the reviewer boot from either partition, a RAM disk or a floppy. The same FA-ST box also worked with an ST after one jumper change, though the two formats can't be shared.
Compatibility notes
- SpartaDOS is the natural partner, and Antic's reviewer called it "the only logical choice". MYDOS is also documented in ICD's hard-disk setup instructions.
- Only controllers that support 256-byte sectors work with the original MIO. ICD's manual lists controllers its format routines don't support.
- An optional 80-column video board was announced ("due for the holidays" in 1986), but the sources don't confirm it shipped.
- ICD's 1MB versions were scarce in 1988 because of high RAM prices.
- A "new series" MIO by Ken Jones (MEtalGuy66) appeared in 2006. It's a 1 MB unit that also accepts 512-byte-sector SCSI controllers and has a PC-standard DE-9 serial port.
Using one today
Altirra emulates the MIO with an emulated SCSI disk. Its save states include the MIO, and its SCSI emulation works around an MIO 1.1 firmware quirk. You need an MIO firmware ROM image to try it. On real hardware, remember the 256-byte-sector rule when choosing a drive or controller, or look for the 2006 "new series" board, which accepts 512-byte sectors.
Credits
- Picture: ICD's Multi I/O board in a period promotional photo. — Photo from Gury's Atari 8-bit Forever portal (Multi I/O) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.3.3, 4.6, 5.2.2 — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 5 No. 8 (December 1986) and Vol. 6 No. 9 (January 1988), Shoppers Guides — AtariMagazines.com (Kevin Savetz), 1986
- Antic Vol. 7 No. 6 (October 1988), FA-ST Hard Disk review (Matthew Ratcliff) — AtariMagazines.com (Kevin Savetz), 1988
- Altirra Hardware Reference Manual, sections 11.1-11.3 (PBI, ICD Multi I/O) — Avery Lee (Altirra)
