SWP ATR8000

Year
1982
Type
Interface
Category
Multi-function disk/printer/RS-232 interface and CP/M co-computer
Manufacturer
Software Publishers, Inc. / SWP Microcomputer Products, Inc. (Arlington, Texas)
ATR8000 interface box with attached floppy disk drives

Overview

The ATR8000 from Software Publishers, Inc. (later SWP Microcomputer Products) was half interface and half computer. Antic's July 1983 reviewers called it "a complete 16K, Z80-based computer" with no screen or keyboard of its own. Plugged into the Atari's SIO port, the basic unit was a universal interface. It controlled up to four standard 5.25-inch or 8-inch disk drives, a Centronics printer and a serial device. The 64K version could also boot CP/M 2.2, with the Atari acting as its terminal. A later add-on board, CO-POWER, put an 8088 inside to run MS-DOS.

Specifications

Item Value
CPU Z80A, 4 MHz
RAM 16 KB or 64 KB
Firmware 2 KB or 4 KB ROM, switchable out for RAM
Disk drives Up to four standard drive mechanisms, 5.25" or 8", single or double density
Printer port 34-pin PCB edge; buffer 4 KB (16K unit) or 48 KB (64K unit)
Serial port RS-232, 26-pin PCB edge
Atari connection SIO in, plus a second SIO port for daisy-chaining
Other chips Z8430 counter/timer (CTC)
1983 prices (Antic) $349-350 for the 16K unit; $599-600 for 64K with CP/M; $250 upgrade

History

Antic's two reviewers covered both versions. Chuck Skinner bought a 16K unit, added a Tandon TM-100-1 drive with its own case and power supply, and found that the owner's manual told him everything he needed. He listed two catches. The RS-232 port couldn't be reached through the 850's R: handler, so 850-based terminal programs didn't work. And Atari 810 drives worked with Atari DOS and in single density with OS/A+, but not at all under CP/M. Mike Dunn's 64K unit came with CP/M, a terminal program that showed the 80-column CP/M screen as two scrolling 40-column windows, and utilities for reading Osborne, Kaypro II, Xerox and 8-inch disk formats. SWP fixed early bugs with free replacement ROMs. Dunn concluded the box was "a good buy" for anyone wanting CP/M software as well as Atari games.

The RS-232 limitation was later addressed. R: device handlers for the ATR8000 were included with MYDOS 3.1x and 4.x and with SpartaDOS. Antic's 1985 DOS survey recommended SpartaDOS to ATR8000 owners because it could mix 5.25-inch and 8-inch drives, single- or double-sided and single- or double-density, all at once.

Expansion

  • CP/M 2.2 with the ATR8000 CP/M Supplement and the Auto-Term ADM-3A emulator, which also supported the Bit 3 Full-View 80 card. SWP's Autoterm80 and, from Amiable Computer Enhancements, the DT-80 80-column terminal cartridge gave 80 columns on a stock Atari.
  • CO-POWER-88 / CO-POWER-Plus (1984-86): a 5.33 MHz 8088 with 128 KB to 1 MB, supplied with MS-DOS 2.11 at first and later with PC-DOS loader utilities.
  • SWP Host Adapter (1986): a WD1002 MFM controller and a 10 MB ST-412-class hard disk, which could be partitioned for MYDOS, CP/M and CO-POWER MS-DOS.
  • Z-Tec 1000: an internal SASI host adapter for 64K units.

Using one today

  • The I/O port map (printer status, FDC, RS-232 status, SIO status, CTC) is documented in the Altirra Hardware Reference Manual, which helps with repairs and firmware study.
  • You supply the drives. Antic's 16K reviewer used a bare Tandon TM-100-1 mechanism with a separate enclosure and power supply, and the box accepts 5.25-inch or 8-inch drives.
  • Under CP/M, only the drives attached to the ATR8000 are usable. Atari/Percom SIO drives aren't supported under CP/M.

Credits