CSS Black Box
- Year
- 1989
- Type
- Interface
- Category
- Parallel-bus multi-function interface (SCSI/SASI, printer, RS-232, monitor)
- Manufacturer
- Computer Software Services (CSS), Rochester, New York
Overview
The Black Box from Computer Software Services (CSS), released in 1989, covers much of the same ground as ICD's Multi I/O. It's a single board with connectors for both the XL parallel bus (PBI) and the XE's cartridge-plus-ECI port. It adds a SASI/SCSI hard-disk port, a Centronics printer port with spooler, an RS-232 port, a screen-dump facility and a resident 6502 machine-language monitor. Later units also accept the Black Box Floppy Board, which connects ordinary PC floppy drives directly.
Specifications
| Item | Value |
|---|---|
| Released | 1989 |
| Connection | PBI (50-pin header, ribbon cable included) and cartridge+ECI edge connector |
| Hard disk | 50-pin SASI/SCSI header, up to 8 controllers; 512-byte-sector controllers supported |
| Partitions | Up to 96, each emulating a single- or double-density floppy, with write protection |
| Parallel port | 34-pin PCB edge; definable as any of P1:-P8:; 64 KB spooler in XE memory or optional Black Box RAM; text or graphics screen dumps |
| Serial port | 34-pin PCB edge; R: handler in ROM, 850-compatible; up to 19.2 kbit/s with hardware flow control |
| High-speed SIO | Happy, XF551 and UltraSpeed protocols |
| Chips | 6551 ACIA, 6522 VIA, 6821 PIA; registers at $D100-$D1FF, RAM window $D600-$D6FF |
| Software | MYDOS and hard-drive utilities on disk |
Features and upgrades
- Black Box Enhancer, an upgrade for older units and standard on newer ones, adds enhanced printing and screen dumps, the Task Master sector editor and an Archiver program.
- Black Box Floppy Board, a daughterboard with its own 6504 CPU, 2 KB RAM, 4 KB ROM and a 1770 FDC. It runs up to four PC-style floppy drives: single-sided 40-track drives for all Atari formats, plus double-sided, 80-track and high-density drives, so 3.5-inch and 8-inch drives can work too. It ships with a replacement Black Box ROM (version 2.x, 64 KB) that supports it. A 5.25-inch 1.2 MB drive can only be used in high-density mode.
- ATASPI, a SCSI programming interface developed later by Matthias Belitz (msc) and Lee Barnes, makes possible a SCSI monitor, a CD audio player and a CD/DVD data reader running on the Black Box.
How it works
The Black Box implements the OS's PBI device-select register at $D1FF only partially. It overloads it with RS-232 status lines (DCD, CTS, DSR), the SCSI MSG signal and a 4-bit ROM bank number, and reports the menu button state in the PBI interrupt-status register. Software that probes PBI devices by poking $D1FF can see unexpected values when a Black Box is present.
Using one today
- Because it supports 512-byte-sector SCSI devices and up to 96 partitions, the Black Box is more forgiving of drive choice than the original ICD MIO.
- Altirra emulates the Black Box (including in save states) and the Floppy Board. You'll need a Black Box firmware image. This is a convenient way to explore its menu and monitor without the hardware.
- The unit has a hardware menu button. Mathy van Nisselroy's Black Box page collects tips and tricks.
Credits
- Picture: The CSS Black Box board. — Photo from Gury's Atari 8-bit Forever portal (Black Box) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.3.3, 4.6, 5.2.2 — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra Hardware Reference Manual, sections 11.4 CSS Black Box and 11.5 Black Box Floppy Board — Avery Lee (Altirra)
- Altirra emulator release notes — Screenshot from Avery Lee's Altirra page, virtualdub.org
