ADS Integrater

Year
1983
Type
Upgrade
Category
Atari 800 personality board (Corvus hard disk and Axlon RAM disk support)
Manufacturer
ADS (Adams Computer Systems, Inc.); designed by D.S.S.A. (David & Sandy Small and Associates)

Overview

The Integrater was a replacement personality board for the Atari 800, the plug-in card that holds the operating system ROMs. It was designed to tidy up two awkward add-ons of the early 1980s: the Axlon RAMDISK banked-memory board and the Corvus hard disk. Both came with their own DOS-level software, which conflicted with much of the software on the market. The Integrater moved that support into the computer's firmware. A RAM disk and Corvus volumes then looked like ordinary disk drives to any DOS, and the 800 could boot directly from the Corvus instead of from an 810.

Hardware and software were designed by D.S.S.A. (David & Sandy Small and Associates), the authors of Antic's "Systems Guide" columns. Sales support came from Adams Computer Systems, Inc. (Allan Adams), trading as ADS. It was the first third-party RAM-disk handler for Axlon-style banked memory.

Specifications

Item Value
Type Personality board for the Atari 800 (replaces the CX801 OS module)
Year 1983
Design D.S.S.A. (David & Sandy Small and Associates)
Sales ADS / Adams Computer Systems, Inc. (Allan Adams)
Built-in software smallDOS, including a resident Mount Table Editor
RAM disk Emulates a 90 KB single-density DOS 2.0S disk (707 free sectors) in Axlon banked memory; about twice as fast as Axlon's own MMS RAM drive
Hard disk Corvus disk system (via the 800's controller ports); direct boot, with AUTORUN.SYS-style auto-start of applications
Drive mapping RAM disk can be assigned to any drive number without rebooting or running a program

History

The Smalls built up a large development setup for their game projects in the early 1980s: an ATR8000, an Axlon RAMDISK, an LE Systems drive and a Corvus hard disk. In Antic's December 1983 Systems Guide, "Mission Redux", they explained that the RAMDISK and Corvus "have problems in their operating systems" that made them incompatible with much commercial software. The Integrater fixed that, they wrote, letting both "coexist with anyone's DOS" and boot from the Corvus. Because they had helped design it, they declined to say more. The Corvus had been a major reason their aircraft-simulation game was finished on schedule.

How it works

The board takes the place of the 800's OS module, so its code runs as part of the operating system rather than as a disk-loaded driver. smallDOS intercepts disk-drive calls and, using a mount table, routes each drive number either to a real SIO drive, to a Corvus volume, or to the Axlon RAM disk. The Mount Table Editor is resident, so you can change the mapping at any time, including moving the RAM disk to another drive number on the fly. Because the RAM disk behaves like a standard 707-sector single-density disk, DOS 2.0S and compatible software use it without modification.

On the Corvus side, the Integrater can boot the computer from the hard disk. A boot volume can then start an application automatically using the usual AUTORUN.SYS technique, so a Corvus-equipped 800 could start straight into a program with no floppy involved.

Using it today

Integrater boards are extremely rare, and so are working Corvus setups with Atari interfaces. For most people today the same roles are filled by modern Axlon-compatible RAM boards and Atari 800 personality boards with built-in storage, such as Incognito or the GPB, or by SIO-based disk emulators. If you do find an Integrater, remember it expects an Atari 800 with an Axlon-type memory board for its RAM disk. Corvus support needs the Corvus interface and drive.

Compatibility

  • Computer: Atari 800 only (personality board slot).
  • Memory: Axlon RAMDISK/RAMPOWER and compatible banked boards.
  • Storage: Corvus disk system. Standard Atari SIO drives remain available through the mount table.

Credits