SIO2PC

Year
1989
Type
Utility
Category
PC-hosted disk drive emulator (cable + DOS software)
Developer
Nick Kennedy
Requirements
PC-compatible running MS-DOS with an RS-232 serial port, SIO2PC cable; any Atari 8-bit (no Atari-side software needed)
Nick Kennedy's hand-drawn SIO2PC schematic: a MAX-232 chip linking the Atari SIO data in, data out and command lines to the PC serial port pins

Overview

SIO2PC is a hardware-and-software package by Nick Kennedy that connects an Atari 8-bit to an IBM PC-compatible. The hardware is a small level-shifting cable, the "SIO2PC cable", between the Atari's SIO port and the PC's RS-232 port. The software is an MS-DOS program that makes the PC answer as Atari disk drives. It dates from 1989, with later versions up to 1998. Kennedy's system is one of the most influential pieces of the Atari's afterlife. The .ATR disk image format it introduced became the standard used by nearly every emulator and SIO device since, and "SIO2PC" became the generic name for any such cable.

Before SIO2PC

The idea goes back to CP/M machines. Dave Warker's ATARIBUS (1982–83) and USS Enterprises' Critical Connection (1982–84) both linked an Atari's SIO port to a CP/M computer's serial port and served pseudo-drives from CP/M disk files. The Critical Connection could also act as a printer buffer and let the CP/M keyboard type on the Atari. As CP/M faded, SIO2PC took over the same job for the PC.

What it does

The package's own feature list:

  • Emulates one to four Atari disk drives, storing Atari files on PC hard or floppy disks.
  • Boots from the PC. No real drive is needed to start up.
  • Nothing to load on the Atari. No driver or special software, so there are no conflicts and you can use your favourite DOS.
  • About twice as fast as an Atari 810, and more reliable.
  • Co-exists with real drives on the SIO daisy chain.
  • Hardware-level compatible. Even sector copiers work.
  • File conversion between Atari files and PC files in both directions.
  • Uses, and originated, the .ATR image format.

The PC could also act as a printer buffer.

The ATR format

Kennedy invented .ATR for SIO2PC. It is very close to the older raw .XFD format, a straight dump of the disk's sectors, with a 16-byte header added in front that describes the image. It is the most common image format in Atari emulation.

1050-2-PC

Kennedy also designed 1050-2-PC, a cable that goes the other way: it connects a real Atari disk drive to the PC. The 1050-2-PC function in SIO2PC 4.x allows direct sector I/O with the drive. It can create ATR images that emulate copy-protection schemes when served back by SIO2PC.

The cable

The original SIO2PC cable used a MAX232 line driver. A simplified design using a 1489 receiver chip followed, credited to Rick Cortese. Many builders published their own RS-232 versions. USB adapters came later, typically built around an FTDI FT232R chip, as in Atarimax's Universal SIO2PC/ProSystem interface and Lotharek's SIO2PC-USB. Some modern builders still prefer the classic DB-9 serial version for its robustness: a screwed-down COM cable instead of a fragile mini-USB socket.

Software that uses the cable

The cable outlived Kennedy's DOS program. Many PC-side servers have been written for the same hardware:

Program Platform Notes
APE (Steven Tucker) DOS, Windows 8 drives, high-speed SIO, PRO images, cassette, PC mirror drive
SIO2Linux (Preston Crow) Linux user-space; dynamically sized images
Atari810 (Dan Vernon) Windows up to eight drives
AtariSIO / atariserver (Matthias Reichl) Linux kernel module; not for the earliest two-chip SIO2PC design
SIO2BSD (Konrad Kokoszkiewicz) BSD, Linux, macOS PCLink server
Sio2OSX, SIO Server macOS
AspeQt / RespeQt Windows, Linux, macOS today's usual choice

Using it today

Most people pair an SIO2PC cable (or a USB SIO2PC adapter) with RespeQt rather than the original DOS program. Kennedy's software still matters for history and for the 1050-2-PC imaging function. It was written for MS-DOS PCs with a real serial port. To make an ATR from a real floppy without special hardware, boot the disk in a real drive and copy it sector by sector to an emulated drive with any Atari sector copier. SIO2PC was designed to support exactly that.

Credits