SmartDOS

Year
1984
Publisher
Rana Systems; later The Programmer's Workshop (Astra Systems affiliate)
Type
DOS
Category
Disk operating system (menu-driven, DOS 2-compatible)
Developer
Ron Bieber and John Chenoweth
Language
6502 machine language
Requirements
Atari 400/800/XL/XE with at least 24K RAM recommended; any Atari-compatible single- or double-density drive
White floppy disk sleeve labelled 'Rana Systems — SmartDos Release 6.1 D, © 1984 Rana Systems'

Overview

SmartDOS is a menu-driven DOS that stays compatible with Atari DOS 2 files while adding what owners of double-density drives needed. Its headline feature is in the name: it was the first Atari DOS to be "density smart". It notices whether the disk in a drive is single or double density and switches the drive to match, with no user action. It reads and writes both the Atari DOS 2.0 single-density format and the 256-byte-sector double-density format (DOS 2.0D), so the same DOS handled 810 disks and the larger disks of Rana, Astra and other third-party drives.

SmartDOS came free with several drives: the Rana 1000 (version 6.1D, distributed by Rana Systems) and later the Astra 1620, 2001 and 1001 (version 8.2D, from The Programmer's Workshop, an affiliate of Astra Systems). Antic's 1985 DOS survey reviewed 8.1D and found it "an easy to use product, with more than just the basics".

Features

The Rana manual lists what SmartDOS adds to the usual file operations: copying disks to a different density, copying individual sectors, write-protecting files electronically, diagnosing and sometimes repairing disk problems, changing computer and program defaults, and staying in memory alongside BASIC or the Assembler Editor cartridge without reloading the menu from disk.

The menu uses mostly mnemonic letters, not the DOS 2 layout. From the manual's command appendix:

Key Command What it does
B Binary Save save a block of memory as a file
C Copy File copy files, including a one-drive duplicate mode
D Delete File remove files (wildcards allowed)
E Exit SmartDOS return to BASIC or a cartridge
F Format Disk format in the current density
G Go to Address start a loaded machine-language program
K Copy Sectors copy chosen sectors, used to rescue damaged disks
L Load File load a binary file
M Make System Files write DOS (or DOS and DUP) to a disk in any of four drives
N New File Name rename
O Obvert RESIDUP turn the resident-DUP option on or off
P / U Protect / Unprotect lock and unlock files (protected files show *)
R Reconfigure switch a drive between single and double density, or bring a drive on line without rebooting
S Speed Check test drive rotation speed without harming the disk
T Test Sectors find bad sectors on a disk
V Verify/Retry compare each sector during copies, with 1–9 retries
W Whole Disk Copy duplicate a disk in the same density

A status line above the menu shows which drives are active, their densities and how much memory is free. RESIDUP keeps the disk utility package in memory so the menu comes up without disk access, at the cost of memory. When copying whole double-density disks with one drive on a 48K machine, SmartDOS moves 121 sectors per pass, so expect several disk swaps.

Files on the disk

Early versions came as a utility that modified Atari DOS 2.0S. The Original Master diskette carried a licensed copy of Atari's DOS.SYS and an AUTORUN.SYS that built a Working Master with SmartDOS's own DOS.SYS. Later releases shipped the working master directly. The working disk holds:

  • DOS.SYS and DUP.SYS: the file manager and the menu.
  • DEFAULT: saved configuration.
  • ARCREATE.BAS: creates a file that runs a BASIC program automatically at boot.
  • RS232.ARx: loads the 850 Interface's R: handler. Rename it RS232.AR1 to have it run at boot.

SmartDOS can run several autoload files at boot, named *.AR1 to *.AR9, and it supports both warm and cold restarts.

Behind the scenes

SmartDOS was written by Ron Bieber and John Chenoweth, who hold its 1984 copyright. Version 1.5R circulated as a beta test release in 1984, 6.1D was distributed by Rana Systems and 8.2D by The Programmer's Workshop.

Antic's reviewer noted two weaknesses: SmartDOS did not support any special hardware directly and had trouble with an Axlon RAM disk, even with Omnimon installed. He judged that a minor concern for most users. SmartDOS supports single- and double-density 5.25-inch drives only, with no double-sided or RAM-disk formats of its own.

Using it today

SmartDOS boots in emulators from a single-density image and will happily work with double-density ATR images, switching density on its own as you change disks. Its Speed Check and Test Sectors options were designed for real drives and mean little under emulation, but they remain useful on original hardware. For a DOS 2-style menu with similar density handling plus subdirectories and RAM disks, MyDOS is the usual modern alternative.

Credits