Astra Systems Disk Drives (1620, 2001, Big D, The One, 1001)

Year
1983
Type
Storage
Category
5.25-inch floppy disk drives (third-party)
Manufacturer
Astra Systems, Inc. (Santa Ana, California)
Astra 1620 dual disk drive, black-and-white photo

Overview

Astra Systems was a Southern California maker of Atari drives that specialised in two drives in one box and in double-sided double density. Its line ran from the belt-driven Astra 1620 dual drive of 1983 to the direct-drive 2001, the double-sided Big D, and two single-drive models, The One and the 1001. Astra also gave its name to SmartDOS, which it bundled with most of its drives and which Antic found worked with "all Atari drives".

Models

Model Format Mechanism / notes Bundled DOS
Astra 1620 Dual, SS SD/DD Spring 1983. Belt drive, push-down doors OS/A+ v2 and BASIC A+ (earliest), then DOS XL, later SmartDOS
Astra 2001 Dual, SS SD/DD Direct-drive motors, rotary (flipper) doors SmartDOS
Astra Big D Dual, DS SD/DD Double-sided version of the 2001 MYDOS 3.016 (early), Top-DOS 1.5 (later)
Astra The One Single, DS SD/DD Direct-drive motors Top-DOS 1.5. may never have shipped
Astra 1001 Single, SS SD/DD All known units marked "The One" underneath SmartDOS

Antic's 1986 Shoppers Guide gave approximate prices of $299 for The One, $250 for the 1001, $395 for the 2001 and $495 for the Big D. By the January 1988 guide these had dropped to $275, $225, $400 and $475. Both listings give Astra's address as 2500 South Fairview, Santa Ana, CA.

The 1001 and The One also have a parallel printer port (a DA-15 connector, 850-style) plus a second SIO port for daisy-chaining.

How it works

The Astra 1001 and 1620 use hardware compatible with Percom's 6809-based RFD controller. Their firmware is Percom RFD V1.10 with a single byte changed, which raises the default head step rate from 1 to 2. In practice an Astra behaves like a Percom drive: it answers the Percom configuration-block commands, so DOS can switch it between 810-compatible single density and 180 KB double density. The 1620 launched in spring 1983, though some catalogues date it to 1984.

SmartDOS

Antic's July 1985 DOS survey described SmartDOS 8.1D as "the DOS that Astra has been packaging for some time with its own drives". It's menu-driven like Atari DOS 2, compatible with DOS 2 files, and adds a status line showing each drive's density, a double-density sector copier (121 sectors per pass on a 48K machine), drive-speed and bad-sector tests, write-verify control and density reconfiguration. The reviewer noted it had trouble with an Axlon RAM disk.

Using one today

  • Belt drives. The 1620's belt-driven mechanisms are the ones most likely to need a new belt and a speed adjustment after decades in storage. The later 2001 and Big D use direct-drive motors.
  • Single-sided disks written on any Astra in double density are standard 180 KB images. Big D double-sided disks use the drive's own side-2 layout, so image them on the same drive.
  • Second drive numbering. A dual Astra appears as two separate drive numbers on the SIO bus. Check the drive-select settings before chaining it with other drives.

Compatibility

All models read and write Atari 810 single density. They also run Percom-compatible double density, which DOS XL, SmartDOS, MYDOS, Top-DOS and SpartaDOS all support. None of the Astra models is known to support 1050 enhanced density.

Credits