Standard Floppy Drive Interfaces (PC and Shugart Drives on the Atari)
- Year
- 1982
- Type
- Interface
- Category
- Controllers for industry-standard 5.25-inch, 3.5-inch and 8-inch drives
- Manufacturer
- Various (L.E. Systems, California Microlink, Wuztek, Irata Verlag, Erhard Pütz, Micro-Discount, Karin and others)
- Tags
- floppy, disk-drive, shugart, interface, pc-drive, 3-5-inch, 720k, 1-44mb, karin-maxi, hdi, hyperdrive, no-thrills, le-systems, microlink, storage
- Related
- SIO2PC, SpartaDOS X, SpartaDOS, CSS Black Box, FujiNet, Black Box
Overview
Atari's own drives are self-contained SIO devices, each with its own controller and an Atari-specific format. Mainstream computers used cheap "bare" drives on the Shugart interface: a 50-way cable for 8-inch drives (Shugart SA800, 1976) and a 34-way cable for 5.25-inch and later 3.5-inch drives (Shugart SA400, also 1976). An interface that speaks that bus lets an Atari use the same mass-produced drives as a PC. The drives are cheaper, there are more formats, and with high-density drives you get far more space per disk.
Several Atari drives were already "master" units with a standard port for add-on drives: the Percom range, the ATR8000, the Micro Mainframe MF-1681 and the Amdek AMDC. This page covers the other controllers.
The interfaces
| Interface | Year | Connection | Drives supported | Notes |
|---|---|---|---|---|
| L.E. Systems disk drive ("Leading Edge Systems") | 1982 | Oversized personality board for the 800 | Two 34-pin ports, each for a master and up to three slaves (8 drives in all); SD or DD | Made by two partners, one of them David Small. Sold with Tandon drives as 8-, 4-, 2- and 1-drive systems (LEFDC-08 etc.). A fast duplicator: 17–22 seconds a disk, up to seven copies at once, including non-standard formats. It could also create protected disks (bad sectors, custom track layouts, deleted-sector marks) |
| Microlink Floppy Disk System / "Easy Eight" (California Microlink) | 1982 | Two SIO ports | Two 8-inch drives, 512,512 bytes each (77 tracks × 26 sectors × 256 bytes) | Designed by Atari engineers Dave Shepperd and Mike Albaugh; FD1795 controller; listed in Atari's Special Additions catalogue but probably prototypes only |
| Wuztek HyperDrive | 1988 | XL/XE | 3.5-inch, 720K | $229 in Antic's August 1988 New Products. Included a printer interface with an 8K buffer. Worked with MYDOS, SpartaDOS and other DOSes that handle large disks, but not DOS 2.0/2.5. An optional $100 Hyperspeed cartridge raised transfers to 150,000 baud |
| No Thrills Interface (Irata Verlag USA, Colorado Springs) | 1988 | About the size of a printer interface | IBM-compatible or Atari ST drives | $130, also in August 1988 |
| HDI High-density Disk Interface (Erhard Pütz, Germany) | 1990–91 | SIO; must be last on the chain | Up to four PC drives: 360K/1.2 MB 5.25-inch, 720K/1.44 MB 3.5-inch | WD37C65 controller, up to 500 kbit/s; drives must provide Disk Change on pin 34. Software-compatible with Happy, US Doubler (ROM 2.0, 1991) and Speedy high-speed modes (ROM 3.0, 1998). No enhanced density |
| Floppy Board (CSS) | 1992 | Add-on for the CSS Black Box on the parallel bus | Up to four PC drives including 1.2 and 1.44 MB; 8-inch with a custom cable | Reads ATR8000, Percom and XF551 double-sided layouts and MS-DOS disks (BBXFER utility) |
| ADD Interface ("720K Atari Disk Drive Interface", Micro-Discount) | 1994 | SIO; must be last | 360K 5.25-inch or 720K 3.5-inch | WD1772; drive number 1–4; shipped with MYDOS 4.5 and CSS's BBXFER |
| Karin Maxi (Mariusz Geisler for Karin, Poland) | c.1995 | Cartridge/ECI parallel device (internal version too) | One or two drives: 360K or 720K 5.25-inch, 720K 3.5-inch; SD, ED and DD | WD1770/1772. Design errors made it clash with other parallel devices; a fix was published. trub's modified ROM adds 512-byte sectors. A corrected Karin Maxi 2012 was produced by stryker, trub, Konrad Kokoszkiewicz (drac030) and Sebastian Bartkowicz (Candle'O'Sin) |
Things to know
- Double-sided layouts differ. There was no single Atari standard. ATR8000-style controllers go "track first" (alternating heads), Percom goes side first, and the XF551 goes side first with the second side in reverse track order. A DSDD disk from one system may not read on another. Interfaces like the CSS Floppy Board support several layouts.
- High density needs the right controller. Most Atari controllers handle only single and double density. The HDI and the CSS Floppy Board are the exceptions that drive 1.2 MB and 1.44 MB disks.
- DOS matters. Large disks need a DOS that understands them: MYDOS, SpartaDOS or SpartaDOS X. Atari DOS 2.0/2.5 can't use the extra space.
- Today most people get the same benefits from SD-card devices and PC links. See DIY SIO drive emulators, SIO2PC and FujiNet. The interfaces above are still useful for reading old disks in PC formats, and the Karin Maxi 2012 shows the idea has outlived the 1990s.
Credits
- comp.sys.atari.8bit FAQ (Michael Current), 3.2.7 How can I use an industry standard floppy disk drive? — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 7 No. 4 (August 1988), New Products: No Thrills interface; HyperDrive — AtariMagazines.com (Kevin Savetz), 1988
- HDI operating system listing (Erhard Puetz), Nir Dary CD collection — Nir Dary collection
