MyTek / AtariBits (Michael St. Pierre)

Type
Vendor
Category
Open-hardware designer
Manufacturer
Michael St. Pierre (AtariAge: mytek)
A small blue JOY2PIC-STIK circuit board with a zero-insertion-force socket plugged into the joystick port of an Atari 1200XL, with a bare board beside it

Overview

AtariBits (ataribits.weebly.com, also reachable via www.AtariBits.com) is the project site of Michael St. Pierre, known on AtariAge as mytek and also as MyTek. It calls itself the "home of DIY Atari 8-bit and ColecoVision hardware upgrades". Unusually for this list, it isn't a shop. St. Pierre states that nothing on the site is for sale by AtariBits, and that the occasional "buy" button for bare boards from OSH Park earns him nothing. The design files are offered for anyone to build, modify or sell. Most of the projects are under a Creative Commons Attribution-ShareAlike 4.0 licence, and the site also describes its design files as public domain. Credit to AtariBits, Michael St. Pierre or Mytek is requested but voluntary.

Assembled versions of many designs are sold by The Brewing Academy, which also offers bare boards and kits.

Projects on the site (as of November 2026)

Project What it is
1088XEL Mini-ITX Atari motherboard on the original chips, with U1MB, UAV video, stereo POKEY and PS/2 input. Accessories include the XEL-CF3 CompactFlash drive
1088XLD a motherboard that fits a 1050 drive case, adding IDE, MIDI and a built-in wavetable synth
576NUC+ and NUCplus4 a 4.5-inch-square Atari with 576K, plus a daughterboard adding 1 MB, R-Time 8, A8PicoCart, SDrive-NG, FujiNet and a MIDI player
TK-II and TK-II-STEREO PS/2 keyboard interfaces (a modern TransKey), one with a second POKEY
XEP80-II a 4.5-inch-square XEP80 80-column reproduction with optional HDMI output via a converter and an automatic video switch, powered from the joystick port. See XEP80
UGV-II GTIA piggy-back video board with VGATE overscan blanking
MIDI SIO2MIDI and MIDI XEL boards: MIDIMATE-compatible interfaces. See homemade MIDI interface
JOY2PIC a PIC microcontroller programmer on an Atari joystick port. A voltage tripler raises one joystick line to the programming voltage, and the other three handle the data
MouseTari firmware for a PS/2-to-ST/A8 mouse interface chip, released as firmware only
SDrive-Simple a minimal SDrive-MAX-based board for internal fitting, plus a 576NUC+ version
Memory RAMBO XL-II, a reverse-engineered clone of ICD's 256K RAMBO XL, and 1200XL-1mb, a solder-less 1088K static-RAM upgrade that piggy-backs four chips and also removes DRAM-related video noise
CV-NUC+ a miniature ColecoVision clone, outside this site's scope

Working with the designs

  • Downloads: each project page carries schematics (PDF), Gerbers, BOMs where available, and firmware. PIC-based projects include flashing files for JOY2PIC and for third-party programmers.
  • Experimental status: St. Pierre describes everything as experimental and "in a state of constant flux", with no promise of updates. He advises checking the forum threads for known issues before buying parts or boards.
  • Support: he no longer offers a direct contact link and asks people not to send private messages without an invitation. Questions go to the relevant AtariAge threads, which each project page links. The 1088XEL/XLD projects have an AtariAge owners' and builders' club.

Why it matters

AtariBits is one of the most complete sources of free, buildable Atari 8-bit hardware: whole computers, input devices, video and sound. Because the files are open, other makers and shops can produce the boards, which keeps designs available even when one seller runs out. For other sources see where to buy Atari 8-bit hardware and The Brewing Academy.

Credits