Atari XEP80 Interface Module (80-column display)

Year
1987
Type
Interface
Category
80-column video interface and parallel printer port
Manufacturer
Atari Corp. (made in Taiwan)
Grey Atari XEP80 80-column interface box

Overview

The Atari's 40-column screen was a long-standing handicap for word processing, spreadsheets and terminal work. The XEP80 was Atari's own answer, arriving in 1987 after years of promises. Rather than replacing the computer's video, it is a separate box that plugs into joystick port 1 or 2, receives text over a fast serial link through the port's direction lines, and generates its own 80-column monochrome composite video signal for a second (or switched) monitor. It also provides a standard Centronics/IBM-style 25-pin parallel printer port, so it doubles as a printer interface.

Antic's technical editor called it a "Miracle Box" in July 1987: text was "razor-sharp" on a monochrome monitor and still readable on a colour one, and "far superior to any software-only commercial products that produce an 80-column display." The price was $79.95.

Specifications

Item Detail
Display 80 × 25 text window onto a 256-column internal line buffer (scrollable horizontally); 8 KiB static RAM
Character sets Standard XL/XE set and the international set
Text attributes Inverse, underline, blinking, double width/height (via XIO calls)
Graphics Bit-mapped mode of 320 × 200 pixels, about half the text window's size
Video Monochrome composite on a phono jack, 50 Hz or 60 Hz selectable by software; 250 lines per field at 60 Hz, 300 at 50 Hz (more than standard TV)
Printer port DB-25 parallel (subset of Centronics/IBM PC), same cable as the Atari ST
Link to computer Joystick port: serial at about 15.6 kHz via the up (out) and down (in) lines
Audio None
Power 9 V DC, 400 mA (Atari C010472, C016353 or C018084 — the 2600-style adapter)
Software Boot disk DX5087: DOS 2.5 plus AUTORUN.SYS handler (S:, E: and P: replacements), source code and demos
Manual Atari XEP80 Interface Module Owner's Manual (1987)

History

The XEP80 began life as the adapter half of the "XM128" 80-column monitor/adapter combination announced at the January 1985 CES; the monitor never shipped. Atari previewed the adapter again in 1986, introduced it as the XEP80 at the June 1986 CES, and finally shipped it in autumn 1987 alongside AtariWriter 80, an 80-column version of AtariWriter Plus. Jose Valdes was the key hardware engineer and Lane Winner the software developer. Its case is shared with the SX212 modem, which explains the unused speaker brackets and status-light recesses inside.

Using it today / Known issues & tips

  • Booting. Boot the supplied disk; AUTORUN.SYS installs replacement E: and S: handlers so that BASIC, DOS 2.5 and other software using the standard screen editor appear in 80 columns. Antic found it did not work with DOS 2.0S. Holding SHIFT while the handler loads installs only the printer handler and leaves the normal 40-column screen (Antic's review gave the key as SELECT).
  • Printer port. The OS has no driver for a joystick-port printer, so the XEP80 handler supplies its own P: with eight printer slots (P1: = XEP80 port, P2: = 850, P3:–P8: = Atari's SIO printers).
  • Monitors. Its extra scan lines suit monochrome composite monitors of the time; modern displays and colour sets may need adjustment, and Atari said a TV set would not be satisfactory. Altirra ships an XEPVHOLD utility to improve timing compatibility with modern displays.
  • Graphics are slow. PLOT and DRAWTO are not supported, and Antic took five minutes to draw and fill a small circle.
  • Power adapter. Antic's prototype adapter ran unusually hot.
  • Emulation. Altirra emulates the XEP80 in detail and includes a faster driver (ALTXEP8U.SYS).

Credits