1088XEL and 1088XLD Motherboards
- Year
- 2017
- Type
- DIY project
- Category
- Replacement Atari motherboard (open design)
- Manufacturer
- Michael St. Pierre (MyTek / AtariBits); boards and kits sold by The Brewing Academy
Overview
The 1088XEL and 1088XLD are complete new Atari 8-bit motherboards designed by Michael St. Pierre (AtariAge: mytek) and published on his AtariBits site. Both are built around the original Atari VLSI chips: 6502C SALLY, ANTIC, GTIA, POKEY, PIA and the MMU. The boards then integrate the most popular modern upgrades so you don't have to hack them into an old machine. The "1088" in the names is the total RAM: 64K main memory plus 1 MB extended.
St. Pierre treats them as DIY designs. The schematics, bills of materials, Gerber files and PCB sources are all downloadable, and most of his work is under a Creative Commons Attribution-ShareAlike 4.0 licence. Anyone can build or sell boards. The Brewing Academy sells bare boards, parts kits, assembled boards and complete systems.
1088XEL (Mini-ITX, 2017–2018)
The XEL is a 17 × 17 cm Mini-ITX board, made to fit off-the-shelf PC Mini-ITX cases. Beta testers showed modified version 1.0 boards at VCF Midwest 12 in 2017, and the version 1.1 production files are dated May 2018. Built in are:
- Ultimate 1MB functions (1 MB RAM, flash OS/BASIC/SpartaDOS X, PBI BIOS), from Candle's U1MB design sold by Lotharek
- UAV-quality video, from the AtariAge member Bryan's upgrade, plus St. Pierre's VGATE overscan blanking
- dual POKEY stereo sound
- TK-II PS/2 keyboard and MouseTari PS/2 mouse interfaces. The system is designed around a PC keyboard and mouse
- an MPBI (mini Parallel Bus Interface) port. The XEL-CF3 board on it adds an internal CompactFlash "hard disk" without using the cartridge slot.
Optional accessories include MIDI XEL boards, Sophia or VBXE video upgrades for RGB output, and an RGB SCART cable. Jonathan Halliday (flashjazzcat) wrote a 1088XEL-specific U1MB BIOS, which is needed for the XEL-CF drive and recommended anyway. It is on atari8.co.uk; version 4.2 is dated 24 January 2023.
1088XLD (1050 case, 2019–2020)
The XLD fits a gutted Atari 1050 disk-drive case with minimal changes, which gives it an XL-era look. It has a 4-layer main board and two stacked I/O boards. Level 1 is mandatory and carries the keyboard, mouse and joystick connectors, a 3.5 mm stereo jack and LEDs. Level 2 is optional and adds the MIDI sockets and a mount for a CF-IDE adapter. Beyond the XEL's feature set it adds:
- a built-in IDE interface for a CompactFlash drive
- a MIDIMATE-compatible MIDI interface with IN, OUT and buffered THRU, plus an internal Dream Blaster S2 wavetable synth module
- an internal cartridge/ECI edge connector for expansion.
An alpha prototype was demonstrated in January 2019, and production version 1.1 schematics are dated April 2020. Dropcheck's I/O ModSystem brings the cartridge slot out to the front and adds a Wi-Fi modem and a parallel printer port. It is only sold fitted to complete systems.
Building one
- Skill level: expert. St. Pierre warns that a missed joint, a solder bridge or one marginal chip can stop the board booting. It is an "enter at your own risk" project for people who can troubleshoot as well as solder.
- Programmable parts: the PIC microcontrollers for the keyboard, mouse and VGATE need flashing. The XELflash and XLDflash packages contain ATR images for St. Pierre's JOY2PIC programmer (an Atari joystick-port PIC programmer), XEX files and HEX files for PICkit-type programmers.
- Boards: the Gerbers are set up for JLCPCB or ALLPCB, since they're too large for cheap shared-PCB services. KiCad (ivop) and Eagle (Dropcheck) versions of the XEL schematic also exist.
- CF cards: for the XEL-CF3, use the Texas Instruments 74F-series chips listed in the BOM. St. Pierre found that SanDisk cards rated at 30 MB/s or less work best.
- Support: St. Pierre asks for questions in the AtariAge 1088XEL/XLD builders' threads and club rather than by private message.
Why it matters
These boards show that a "new" Atari can be built today without emulation or FPGAs, using salvaged original chips and modern glue logic. St. Pierre's later 576NUC+ shrinks the idea further. Related pieces include the Ultimate 1MB, TransKey-II, UGV video board and stereo POKEY upgrades.
Credits
- Picture: A version 1.1 1088XEL with the XEL-CF drive and a Sophia DVI/RGB board in a Realan H60 Mini-ITX case. — Michael St. Pierre (MyTek), AtariBits (CC BY-SA 4.0 (per AtariBits site notice))
- AtariBits (Michael St. Pierre) — 1088XEL Mini-ITX 8-Bit Motherboard — Michael St. Pierre (MyTek), AtariBits (CC BY-SA 4.0 (per AtariBits site notice))
- AtariBits — XEL-CF3 MPBI-IDE Compact Flash Drive — ataribits.weebly.com
- AtariBits — 1088XLD 1050 Form Factor Atari 8-Bit Motherboard — ataribits.weebly.com
- AtariBits — home page (project overview and licence notice) — ataribits.weebly.com
- atari8.co.uk — 1088XEL firmware (via the site's atari8-co-uk entry) — atari8.co.uk
