576NUC+ Miniature Atari Motherboard

Type
DIY project
Category
Replacement Atari motherboard (open design)
Manufacturer
Michael St. Pierre (MyTek / AtariBits); cases by Steve Boswell; sold by The Brewing Academy
Small black 3D-printed computer case labelled ATARI 576NUC+, with a cartridge (AVG Cart) plugged into a slot on top and joystick ports on the front

Overview

The 576NUC+ is Michael St. Pierre's (MyTek) attempt at the smallest possible Atari 8-bit that still uses the original Atari VLSI chips. The board is 4.5 inches (11.43 cm) square. The name combines Atari's habit of naming machines after their RAM (64K base plus 512K extended = 576K) with Intel's NUC mini-PCs. St. Pierre aimed for the NUC's 4-inch size and missed by half an inch, hence the "+".

Unlike his earlier 1088XEL and 1088XLD, the 576NUC+ doesn't rely on any third-party upgrade boards. Everything is built from off-the-shelf parts, apart from the ESP32 module on the optional FujiNet daughterboard. The firmware flashing package is dated February 2022, and as with his other designs, schematics, Gerbers, BOM and firmware are free to download.

What's on the board

Feature How it's done
Memory 64K base plus 512K SRAM through a custom "EMMU" PLD offering both RAMBO and Compy-Shop banking (the latter with independent ANTIC/CPU access)
ROM the XE Game System layout, where OS, BASIC and a game share one chip, doubled to a 64K 27C512 EPROM: two selectable OS versions and four language/game slots
Keyboard and control a NUC-specific TK-II PIC that reads a PS/2 keyboard and also acts as system controller: power on/off, OS and slot selection, VGATE and RAM mode, all by keyboard shortcuts
Video an FMS6400-based composite/S-Video output near UAV quality, plus VGATE overscan blanking
Storage and I/O no cartridge slot or standard SIO socket, for lack of space. An internal SIO expansion port takes a FujiNet daughterboard (Wi-Fi, Bluetooth and SD), Steve Boswell's FujiNet/Cart board (which restores a cartridge slot) or an SDrive daughterboard. A DE-15 socket with an SIO2Dsub adapter connects ordinary SIO peripherals
TV standard NTSC on the main board. PAL users add the PALburst GTIA piggy-back board, since the PAL colour-burst circuit wouldn't fit

A later NUCplus4 daughterboard adds 1 MB of extended RAM, an R-Time 8 clock, an A8PicoCart multicart (limited to 128K images), SDrive-NG, FujiNet and a SAM2695 wavetable MIDI player.

Building one

  • This is an SMD project. St. Pierre warns that only people with extensive surface-mount experience should attempt a DIY build, and asks builders to seek help on the public AtariAge forums rather than contacting him directly.
  • Five programmable parts: the MMU (ATF16V8BQL PLD, or a stock XEGS MMU), the EMMU (ATF22V10C), the OS ROM (W27C512 or SST27SF512 EEPROM, or any UV-erasable 27C512), the TK-II PIC16F1847, which is soldered down and programmed in-circuit through header J7, and the VGATE PIC12F1572. A TL866II Plus programmer and a PICkit (or St. Pierre's JOY2PIC joystick-port programmer) cover them all.
  • Required fix: the crystal oscillator's poor duty cycle causes colour bleed. St. Pierre published a simple two-component fix on AtariAge and later an alternative modification (576nuc_video_mod_1_2c). Apply one of them.
  • Cases: Steve Boswell (Mr Robot) designed 3D-printable cases with 400/800-, XL- and XEGS-inspired details, in versions with and without the FujiNet/Cart board. The standard case STLs are public domain. You choose a base, a back panel and a lid.

Buying one

The Brewing Academy sells fully assembled and tested 576NUC+ boards, the PALburst board, the FujiNet and FujiNet/Cart daughterboards, and cases, plus bare boards for DIY builders.

See also

TransKey-II (the keyboard technology inside), UGV video board (the same video and VGATE circuit for stock machines), FujiNet, and MyTek / AtariBits.

Credits