Atari 830 Acoustic Modem
- Year
- 1980
- Type
- Peripheral
- Category
- Modem (300 baud acoustic coupler)
- Manufacturer
- Atari, Inc. (made by Novation)
Overview
The 830 is an acoustic coupler: instead of plugging into the telephone line, it couples acoustically to an ordinary telephone handset, sending its data as audio tones into the mouthpiece and listening to the earpiece. Acoustic designs were common at the time because, in the U.S. and Canada, equipment not made by AT&T could only connect directly to the Bell network through an approved coupling device; direct-connect third-party modems had only appeared in 1978.
Built for Atari by Novation and based on its CAT modem, the 830 is a standard RS-232 modem, so it does not connect to the Atari directly. It plugs into serial port 1 of the 850 Interface Module using the CX87 cable supplied, and the computer drives it through the 850's R: handler. It runs at up to 300 baud using the Bell 103 standard — the common speed of early online services such as CompuServe, Dow Jones and The Source.
Specifications
| Item | Detail |
|---|---|
| Type | Acoustic coupler, frequency-shift keying |
| Speed / standard | Up to 300 baud, Bell 103 |
| Frequencies | Originate: transmit 1270/1070 Hz (mark/space), receive 2225/2025 Hz; answer mode reversed |
| Receive sensitivity | −45 dBm |
| Controls | Originate / Off / Answer switch; Full duplex / Test / Half duplex switch; Ready and Power LEDs |
| Interface | RS-232 (DCE), DB-25 socket; requires the 850 (CX87 cable included) |
| Power | 20–24 V AC from Atari CA016751 / Novation 901017 adapter; 7 W |
| Made in | USA, by Novation |
| Documentation | Covered in the 850 operator's manuals (Appendix 13 of the 1980 edition; 1982 Rev. B covers both) |
History
The 830 was introduced alongside the 825 printer and 850 interface at the January 1980 Winter CES, listed at $199.95 in June 1980 and shipped that autumn. From July 1981 Atari sold it in The Communicator kit (CX484, $399.95, U.S. only): 850 interface and power supply, boxed 830 modem, TeleLink I terminal cartridge and manuals, plus one free hour on each of Dow Jones Information Service, The Source and CompuServe. TeleLink I itself was written by Scott Scheiman, one of the 400/800's original engineers. In late 1982 Atari announced that the 830 and 850 would remain available, but the direct-connect 835 in The Communicator II kit (1983) and later the 1030 took over its role. TeleLink II, supplied with the 835, also supports the 830.
Using it today / Known issues & tips
- Needs the 850. Without an 850 (or a compatible third-party RS-232 interface) the 830 cannot be connected.
- Software. Any terminal program using the R: handler works — TeleLink I/II, or later terminal programs — at 300 baud.
- Power. It uses its own 20–24 V AC adapter, not the 9 V Atari transformer; don't mix them up.
Credits
- Picture: Atari 830 Acoustic Modem — Gury's Atari 8-bit Forever portal (gury.atari8.info) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current) — Michael Current (comp.sys.atari.8bit FAQ)
