Atari 850 Interface Module

Year
1980
Type
Interface
Category
RS-232 serial and parallel printer interface
Manufacturer
Atari, Inc.
Atari 850 Interface Module, a beige box with SIO and serial ports

Overview

The Atari's SIO and joystick ports followed no industry standard, so in 1980 a standard modem, letter-quality printer or terminal could not simply be plugged in. The 850 Interface Module solved that. It sits on the SIO bus and provides four RS-232-C serial ports and one 8-bit parallel printer port, giving the 400 and 800 access to modems (including Atari's own 830), the 825 printer, serial and parallel printers from other makers, plotters, teletypes and other computers. Until Atari's SIO modems appeared, it was the way to do telecommunications on an Atari.

Its operating-system support is distinctive. The Atari OS already understands parallel printers through P:, but it has no serial-port driver, so the 850 carries its own R: handler (devices R1:–R4:) in ROM. When the computer boots without a powered disk drive 1, the 850 pretends to be that drive and loads the handler into RAM — signalled by a long beep — and Atari DOS 2.0S, DOS 3, DOS 2.5 and DOS XE can load it from the 850 during a disk boot.

Specifications

Item Detail
Serial ports 4 × RS-232-C (DTE) on 9-pin sockets with Atari's own pinout. Port 1: TXD, RXD, DTR, RTS, DSR, CTS, carrier detect; ports 2–3: TXD, RXD, DTR, DSR; port 4: TXD/RXD, also usable as a 20 mA current loop for teletypes
Baud rates 45.5, 50, 56.875, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600 bit/s (low rates for Baudot RTTY)
Speed limits All four ports together up to 300 baud, or one port at up to 9600 baud
Parallel port 8-bit Centronics-style output on a 15-pin socket (Atari pinout); OS device P: (XL OS also P1:/P2:)
SIO addresses Serial ports $50–$53
Electronics 6507 CPU, two 6532 RIOTs, 4 KiB ROM (C012099)
Connection 2 SIO ports; 3-ft SIO cable included
Power 9 V AC (CA014748 or CA017964); 17 W
Case Early units black anodised aluminium; most units beige plastic matching the 400/800
Cables CX86 printer cable (to 825), CX87 modem cable (DE-9 to DB-25 DCE), CX88 terminal/null-modem cable

History

Atari introduced the 850 at the January 1980 Winter CES with the 825 printer and 830 modem, priced it at $219.95 in June 1980 and shipped it that autumn. From July 1981 it was the heart of The Communicator kit ($399.95: 850, 830 modem and TeleLink I cartridge). A promotion from May to August 1981 cut it to $170. Two firmware revisions exist: the later one also answers as printer P2: and suppresses the BREAK key during concurrent serial I/O instead of ending it. Atari published a 1980 operator's manual (102 pages) and, in 1982, separate operator's and technical manuals. The 850 was built in the USA.

Third-party interfaces such as ICD's P:R: Connection later offered the same functions, and Atari's own later modems (835, 1030, XM301) connected via SIO without an 850. Software support for the 850 stayed strong — BBS Express!, for example, was sold in separate 1030/XM301 and 850 versions.

Using it today / Known issues & tips

  • Loading R:. With no disk drive switched on, power the 850 first, then the computer: a long beep means the handler loaded. With DOS, use a DOS that supports "850 autoboot" or load the handler with a utility such as Altirra's BOOT850.
  • Terminal programs expect R: to be resident; run them after the handler loads.
  • Null-modem transfers. Atari's CX88 terminal cable is a null-modem lead; with it, port 1 can talk directly to another computer's serial port for file transfers.
  • Emulation. Altirra provides full 850 emulation, including the printer port and the original handler relocator.
  • Power. Uses the 400/800-family 9 V AC transformer.

Credits