Atari 825 80-Column Printer

Year
1980
Type
Peripheral
Category
Printer (80-column dot-matrix impact, parallel)
Manufacturer
Atari, Inc. (made by Centronics)
Atari 825 80-column dot-matrix printer with paper loaded

Overview

The 825 was the printer for owners who wanted proper 80-column output — letters, listings and word-processor documents — from an Atari 400 or 800. Rather than design one, Atari had Centronics build it, based on a Centronics desktop model, and sold it only in the United States. Unlike Atari's own 820 and 822, the 825 does not plug into the SIO bus: it has a Centronics-style parallel interface and connects through the 850 Interface Module, using the CX86 printer cable supplied in the box. The operating system's standard P: device drives it through the 850, so BASIC's LPRINT and LIST "P:" work once the 850 is connected and powered.

Its standout feature was proportional spacing with right-justification support, which made it a favourite with the word processors of the day.

Specifications

Item Detail
Print method Dot-matrix impact
Character sets Monospaced 7×8 at 10 cpi (default); condensed at 16.7 cpi; proportional N×9 (N = 6–18) averaging 14 cpi — 96 ASCII characters each, all printable double-width
Line length 80 columns at 10 cpi; 132 at 16.7 cpi
Speed 50 cps at 10 cpi; 83 cps condensed; about 79 cps proportional
Buffer 1,200 dot columns
Paper Roll (3.5–8.5"), fan-fold (9" between pin holes, 9.5" overall), or cut sheets up to 8.5"
Interface Parallel, 40-pin card edge; requires the Atari 850 (CX86 cable included)
OS device names 400/800 OS: P:; XL OS: P:, P1: and P2:
Controls On-line/Local, paper reverse/forward, power
Power 120 V AC, 100 W
Ribbon Zip-Pack Möbius-loop ribbon (Atari CA016087, Centronics 63701468-6003)
Manual Atari 825 80-Column Printer Operator's Manual C015506

History

Atari introduced the 825 together with the 830 modem and 850 interface at the January 1980 Winter CES, listed it at $999.95 in June 1980, and shipped it that autumn. During a May–August 1981 promotion it was offered at $800 instead of $1,000. It is generally identified as based on the Centronics Model 737-1, though Antic's August 1982 printer round-up instead called it "the Centronics 727 with an ATARI label" — either way, a Centronics design.

That Antic review (by Jon Loveless) praised the proportional print as excellent, producing "a fine looking right hand justified document" with any of the three major Atari word processors, and liked its pin and friction feed with forward and reverse paper movement and the cable included in the box. It was blunt about the drawbacks: the loose, cartridge-less ribbon was hard to change ("I have spewed ribbon throughout my computer room on several occasions"), the pin feeds were not adjustable, which made label printing awkward, and paper feeding was poor enough to cause jams on long jobs.

In the XL era Atari replaced it with SIO printers that needed no interface box — the 1025 dot-matrix and the 1027 letter-quality printer — and later the XMM801.

Using it today / Known issues & tips

  • You need an 850 (or another parallel interface that emulates it) — without it the 825 cannot be connected at all.
  • Ribbons. The Möbius-loop Zip-Pack ribbon is the most awkward consumable; the Centronics part number above helps when searching for replacements.
  • Labels. Antic recommended fan-fold adhesive labels for 80-column printers like the 825, but noted that its fixed pin spacing calls for wide label sheets or friction feed.
  • Emulation. Altirra emulates the 825, which helps when testing software that sends 825 control codes for proportional or condensed print.
  • Voltage. Only a 120 V version was made.

Credits