Internet and Wi-Fi Modems for the 8-Bit Atari

Year
2018
Type
Modern device
Category
Modern 'modems' that dial telnet addresses: serial device servers, ESP8266/ESP32 SIO devices and PC emulation
Manufacturer
Various (Lantronix, community projects, FujiNet team, Barts Elektronica)
A small blue ESP-01 circuit board with an ESP8266 Wi-Fi chip, a flash chip, a printed zig-zag antenna and an eight-pin header

Overview

Dial-up BBSes for the Atari are mostly gone. Many have come back as telnet BBSes on the internet. An internet modem connects the two worlds. It behaves like a Hayes modem, answering AT commands and replying OK, CONNECT and NO CARRIER. When the terminal program sends ATDT followed by a host name, though, it opens a network connection instead of dialling. Because the Atari only ever sees a modem, period software such as BobTerm, Ice-T or 850 Express! works unchanged. A Wi-Fi modem is simply an internet modem that reaches the network wirelessly. The Atari can use one in three ways.

Route 1: a box on the RS-232 port

The traditional way plugs a network device into an RS-232 port on an Atari 850 or P:R: Connection, just as a 1980s Hayes Smartmodem would have been.

  • Lantronix UDS-10 / UDS100 / UDS1100 (2000, 2002, 2009). These commercial serial-to-Ethernet "device servers" have a modem-emulation mode. They accept AT commands on a DB-25 DCE port and connect to a network host instead of a phone number. They plug into an 850 through Atari's CX87 modem cable or an equivalent. Developers on AtariAge found two drawbacks. A UDS passes telnet negotiation bytes straight through to the Atari, where they appear as stray characters. PLATOTerm's author also reported losing "many hours" to their quirks.
  • tcpser on a Raspberry Pi. That same developer recommended the open-source modem emulator tcpser on a Raspberry Pi as more reliable. Paul Jones's 2019 usbModem project does this with a PL2303 USB-to-RS-232 adapter on a Debian Linux machine. A Pi is recommended, and it connects to the 850 through a null-modem cable.

Route 2: a device on the SIO bus

These skip the 850 entirely.

  • SIO2WiFi (2018–2019), a project by Sijmen Schouten built on the ESP8266 Wi-Fi microcontroller. It behaves like an R-Verter, so any R-Verter-compatible software can use it. Mr.Atari's software for it includes a routine that brings the ESP8266 from its default 115,200 baud down to 1200, an "ESP8266 R-Verter" R: handler, TinyTERM, a Lite850 R: driver, and a patched fast-I/O PLATOTerm.
  • FujiNet (2019 on), built on an ESP32. It plugs into SIO and emulates an 850's R: device, including the poll the computer uses to load the R: handler. As well as files and its N: network device, it gives the Atari a Wi-Fi modem. FujiNet's own test procedure boots a modem-programs disk from the atari-apps.irata.online server, starts BobTerm at 4800 baud, types AT (answer OK) and then ATDT followed by a BBS's address. The modem answers CONNECT 4800, and NO CARRIER appears when the session ends.
  • sio2flip, a Flipper Zero application that emulates SIO peripherals. Its 850 emulation bridges the modem to a second USB serial port.
  • Chat64 (2024), from Barts Elektronica, is an ESP32-WROVER Wi-Fi cartridge rather than a modem. It gives real-time text chat with Chat64 users on the Commodore 64, ZX Spectrum and Atari 800XL.

Route 3: let the PC be the modem

An SIO2PC cable and a PC program can emulate the 850 and its modem:

  • APE for Windows has an "Internet modem" with an outbound telnet client and an inbound server mode that answers like a Hayes modem, for running an Atari BBS.
  • Sio2OSX (2006/2009) for the Macintosh includes 850 emulation with internet-modem capability.
  • The RespeQt family. A 2017 AtariAge thread documented work on accurate 850 emulation for RespeQt, centred on telnet out to BBSes. Its developers debated whether to answer incoming calls as an auto-answer modem would, by sending RING and then CONNECT. In early 2026 the experimental AspeQt-2k26 fork added a "Wi-Fi modem" mode that maps R1:–R4: either to a real serial port or to a telnet socket (ATDT bbs.address.com:23). Its author called the RS-232 side "very experimental".

Tips

  • Speed. Choose a speed your terminal program and R: handler can actually sustain. FujiNet's walkthrough uses 4800 baud. PLATOTerm's developer noted that higher rates need fast serial hardware such as the Multi I/O or Black Box, as well as faster screen output.
  • Telnet noise. If odd characters appear when you connect, the modem is probably passing telnet negotiation through. Try a different modem emulator, or a BBS port that doesn't negotiate.
  • Handlers. SIO-bus modems need the right R: handler. Use the R-Verter-style drivers for SIO2WiFi and the handler FujiNet supplies through the poll.

Credits