BobTerm

Year
1989
Publisher
Shareware (Bob Puff)
Type
Application
Category
Terminal / modem program
Developer
Bob Puff
Requirements
Atari 8-bit computer, a modem plus a matching R: handler (850 autoloader built in; handlers for MPP, 1030/XM301, SX212 and R-Verter included)
BobTerm 1.21 command menu: a status bar reading Full, Atari, 1200, Buf:18944, with boxed groups of Modem Parms, Dialing Cmds, System Commands and Shift+Control commands

Overview

BobTerm is a terminal program for the Atari 8-bit, written by Bob Puff of Computer Software Services (CSS) in Rochester, New York, and released as shareware between 1989 and 1993. It came at the end of the Atari BBS era. Keith Ledbetter's Express! series and AMODEM had dominated before it, and BobTerm gathered the best ideas of that generation into one fast, modular package. Because it speaks native ATASCII, it is still the program most people reach for when they want to call an Atari bulletin board, on real hardware or through a modern Wi-Fi modem.

Features

The 1.2x releases offered:

  • File transfer protocols: XMODEM, XMODEM/CRC, XMODEM-1k, YMODEM, "FMODEM" (YMODEM with a 4 KB block size) and a "CIS Fast XMODEM" mode that only worked on CompuServe.
  • Terminal emulation: VT52 with odd or even parity, plus CompuServe's VIDTEX cursor positioning.
  • Comfort features: a capture buffer that grows or shrinks with the machine and DOS in use, a chat window with line recall, an on-line clock and real-time clock display, R-Time 8 cartridge support, and a dialing directory.
  • Modular design: an XEP80 80-column driver, and a command-processor module for SpartaDOS 3.2 and SpartaDOS X.

The command menu

BobTerm starts in its command menu. Pressing RETURN takes you into terminal mode. The top line is a permanent status bar showing duplex, character translation (Atari/ASCII), baud rate, free capture-buffer bytes and an online timer. Single keystrokes do everything:

  • Modem parameters: A translation and parity, B baud rate, D duplex.
  • Dialing: E dialing menu (the phone directory), F originate, G send carrier, H hang up.
  • System: C capture buffer, R receive file, S send file(s), J system configuration, K DOS functions, 1–9 disk directories, Q quit to DOS.

While online, SHIFT+CTRL combinations reach the extras without leaving terminal mode: E opens the edit (chat) window and Q recalls the last edit line, O snapshots the screen and P prints it, M sets the margin, W toggles word wrap, K key click, Y the real-time/online clock, D duplex, F translation, S scrolling and T start/stop.

A handler for every modem

Before Hayes-compatible modems became universal, every Atari modem setup needed its own R: device handler. BobTerm has an 850 Interface autoloader built in, and Puff shipped extra handlers for most other setups. Many of them were his own rewrites of earlier drivers:

Handler Hardware Shipped with
MPP.COM (from James Dillow's MPP850.HAN) Microbits/Supra MPP modems 1.10, 1.20, 1.21
XM.COM (rewritten for 1.20) Atari 835/1030/XM301 1.10, 1.20, 1.21
SX.COM (from Dillow's SX212 handler) Atari SX212 via SIO 1.10
RVERTER.COM ("BOB-Verter 2.4 Fast Handler", Oct 1989) SX212 via SIO and R-Verter/SupraVerter cables 1.20, 1.21

Installing a handler is simple. The 1.21 README says to rename the right file to RS232.COM, and BobTerm loads it automatically at startup, with no appending to other files. You load BOBTERM.COM itself from the DOS menu. The full archive does not fit on a single-density disk, so use an enhanced- or double-density disk, or split it across two.

Other people wrote handlers for it too. The German club ABBUC produced BTDATARI.COM for the Datatari serial cable, specifically for BobTerm. Hobbyist plans for home-built R-Verter-style interfaces recommend the BobTerm handlers and report clean transfers at 19,200 baud over a null-modem cable.

Versions

Version Date Notes
1.02 April 1989 early release
1.10 June 1989
1.20 April 1990
1.21 27 April 1990 final full release with documentation
1.22 May 1990 executable-only update; the final version for real hardware
1.23 March 1993 built for emulators of that time; not suitable for modern emulators or real hardware

Use 1.21 or 1.22. A 1990s newsletter noted that a graphics add-on for Oasis BBSes worked with both 1.21 and 1.22, although 1.22 had trouble with some of its features.

Using it today

With FujiNet. A typical session:

  1. Mount modem-programs.atr from the Comms folder of the atari-apps.irata.online TNFS host as D1:, then boot with OPTION held.
  2. Choose 1 for BobTerm from the menu.
  3. Press B to step the baud rate (2400, then 4800), then RETURN to enter terminal mode.
  4. Type AT and RETURN. The FujiNet modem should answer OK.
  5. Dial the BBS by hostname, optionally with a port: ATDT somebbs.example.net:9000.

Most BBSes accept raw TCP connections. A host running a real telnet daemon needs telnet negotiation, which you switch on with ATNET1. If you see a burst of garbage when you connect, you need it.

In emulators and SIO2PC tools. Altirra emulates the 850 interface and modems that dial out over TCP/IP. In the experimental AspeQt-2k26 fork, BobTerm 1.22 set to "850 Module" connected to BBSes successfully. The stock A850.COM loader failed there because it tries to download firmware from the interface, which that tool does not emulate.

New boards. Modern Atari BBS projects still name BobTerm as the client to use on real hardware. The action8bbs project, for example, recommends it for ATASCII connections.

Credits