ICD P:R: Connection

Year
1986
Type
Interface
Category
SIO serial/parallel interface (Atari 850 replacement)
Manufacturer
ICD, Inc. (Rockford, Illinois)
ICD P:R: Connection box with SIO cable, manual and its three ports

Overview

By the mid-1980s Atari's 850 Interface Module, the only official way to attach standard RS-232 modems and Centronics printers, had been out of production for years and was hard to find. ICD's P:R: Connection filled the gap in 1986. It's a small grey box with a built-in SIO cable and an SIO pass-through socket. It provides two RS-232 serial ports and one parallel printer port, uses the 850's connector layouts so existing 850 cables fit, and runs from the computer's own power instead of a wall adapter. Antic's reviewer called it "a better mousetrap at last".

Specifications

Item Value
Released 1986
Size About 4 × 6 inches
Atari connection Built-in SIO cable plus SIO daisy-chain port
Serial ports Two, DE-9 with Atari 850 pinout; R1: and R2:
Parallel port One Centronics port, DA-15 (850 layout)
R: handler In the interface's ROM, largely 850-compatible
Power Taken from the computer (no external supply)
Price $69.95 (1986); $89.95 (Antic, January 1988). ICD's cables $14.95
Bundled software 850 Express (850 version of 1030 Express), AMODEM 7.2, RSCOPE, PRC.SYS
Sister product ICD Printer Connection: SIO cable to a single Centronics plug, $59.95

Compatibility

Antic's October 1986 review went into detail. The P:R: is completely compatible with the 850 at the CIO level, so programs that open R: or P: through the OS work unchanged. A few programs talk to the 850 at the lower SIO level, and for those ICD supplied PRC.SYS, a translator that makes them work (HomeTerm was the example given). Atari's PLATO cartridge didn't work with it at the time. The 1200XL needs a small hardware modification, which the review says takes less than five minutes with the documentation's instructions. (Other SIO-powered interfaces of the time, such as Digital Devices' Ape-Face, also needed separate 1200XL versions with external power.) The reviewer found the documentation "spectacular": it includes the complete R: driver source listing, industry-standard pinouts, and a detailed account of how the RS-232 ports work.

The January 1988 Shoppers Guide recommended it as the inexpensive replacement for the "discontinued 850", noted that Supra's 2400-baud modem and the Avatex 1200 worked with it, and suggested it for connecting Atari's ST-oriented SMM804 parallel printer to an 8-bit. The 1986 guide listed the Hayes Smartmodem 1200 and the Avatex as needing "an 850 or P:R: interface".

Using one today

  • Treat it as an 850. Any terminal program, BBS package or printer driver written for the 850 R: and P: handlers should work. For the odd SIO-level program, load PRC.SYS first.
  • Because it's powered from SIO, check that your computer's supply is healthy. On a 1200XL, check whether the modification has been done.
  • A serial-to-Wi-Fi "Internet modem" that accepts Hayes AT commands can be connected to an R: port with a standard modem cable, the same way an RS-232 modem would be. That's the same arrangement used with an 850.

Credits