CSS Quintopus SIO Port Expander
- Year
- 1989
- Type
- Peripheral
- Category
- SIO port expander / two-computer switch
- Manufacturer
- Computer Software Services (CSS), Rochester, New York
- Tags
- css, computer-software-services, sio, port-expander, peripheral-sharing, 1989, xm301, printer-connection
- Related
- MAC/65, SIO2PC, CSS Multiplexer (MUX), Black Box, Scramble, CSS XF551 Enhancer
Overview
Every Atari peripheral normally hangs off a single daisy chain. Some popular devices, such as the XM301 modem and ICD's Printer Connection, are "dead ends" with no second SIO socket, so you can only have one of them at the end of the chain. Quintopus! from Computer Software Services (the Rochester, New York firm behind the Black Box and Multiplexer) solves this with a small circuit board carrying six SIO sockets. The name suggests five. CSS added a sixth socket late on and kept the name.
Antic reviewed both versions in May 1989. The plain Quintopus cost $39.95. The switchable model, sold as the Deluxe Quintopus, cost $59.95.
Versions
| Model | Ports | Use |
|---|---|---|
| Quintopus | 6 unswitched SIO sockets | Star-wire the computer to up to five peripherals or chains |
| Deluxe Quintopus | 4 unswitched + 2 switched sockets (toggle switch each, marked with white dots) | Connect two computers to the switched ports and give one of them the peripherals; or switch between two similar devices, such as two printers |
The unit is a bare PCB about the size of a 3x5 index card, with the switching components, the toggles and six connectors. CSS left out a case to keep the price down; Antic was told a case would have added about seven dollars. The reviewer suggested a Radio Shack project box if you wanted one.
Why it helps
- Shorter, simpler wiring. Plug the Quintopus into the computer and each peripheral into its own port. There are fewer connections between the computer and any one device, and less cable. That helps SIO-powered devices like the XM301 and Printer Connection, which work best near the start of the chain.
- Two computers, one set of peripherals. With an Atari on each switched port, the computer whose switch is on owns the disk drives, printer and modem. Antic's reviewer ran an XEGS and an 800XL this way. He did backups and fractals on the XEGS, then flipped switches (and his monitor input) to get back to MAC/65 on the 800XL.
- Two printers. Put a letter-quality printer such as the 1027 on one switched port and a dot-matrix printer on the other.
Cautions
The switches are independent single-pole toggles, so nothing stops both being on at once. Everything works until both computers try to use the bus together. Neither knows the other exists, and two machines writing to one disk will scramble it. The reviewer wished CSS had used one double-throw switch so that only one port could be live. He recommended "manual handshaking": agree who has the bus, and do most of your work in a RAM disk.
He also warned that if one computer is switched off while its port is still enabled and the other machine is running, the dead computer draws power from the bus. Switch a computer's port off before you power it down.
Compared with other sharing devices
The Quintopus is a passive switch. Supra's earlier MicroNet handed the bus to up to eight computers automatically and released it after five seconds of silence. The CSS Multiplexer is a true network over the cartridge port. In the comp.sys.atari.8bit FAQ, the Deluxe Quintopus is listed as a way to share up to four SIO device chains between two computers.
Using one today
The design is simple: switches and SIO sockets with no logic. A switched port is just as handy for flipping between a modern SIO device such as an SIO2PC or SDrive and real drives, or between two computers on a test bench. The same rules apply: only one computer live at a time, and switch a port off before powering its computer down.
Credits
- Antic Vol. 8 No. 1 (May 1989), New 8-Bit Power Tools: Quintopus! (Matthew Ratcliff) — AtariMagazines.com (Kevin Savetz), 1989
- comp.sys.atari.8bit FAQ (Michael Current), 5.3.3 How can Atari computers share an SIO chain of peripherals? — Michael Current (comp.sys.atari.8bit FAQ)
