Supra MicroNet

Year
1985
Type
Peripheral
Category
SIO peripheral-sharing hub
Manufacturer
Supra Corporation (developed by Microbits Peripheral Products)

Overview

MicroNet was the first product that let several Atari 8-bit computers share peripherals. It was designed at Microbits Peripheral Products (MPP) and sold by Supra Corporation, MPP's successor, from 1985. The hardware is a small white box with nine SIO connectors. Up to eight computers (any 400, 800, XL or XE) plug into the sides, and the usual daisy chain of disk drives, printer interface and modem plugs into the end. A wall transformer powers the box, which also isolates the computers electrically from each other.

Antic's February 1986 review, at $199.95, put it bluntly. If you were waiting for a real Atari network where machines could share data and talk to each other, "you'll have to keep waiting". MicroNet is a switchbox for the peripheral bus, not a network. In a classroom it could still save a lot of money.

How it works

Feature Behaviour
Computers Up to 8, any 8-bit model
Peripherals One normal SIO chain: disk drives, printers, modems
Arbitration First come, first served. When one computer starts talking to a peripheral it owns the whole bus
Release The bus is freed about five seconds after the active computer goes quiet
Busy bus Other computers get an I/O error. Supra supplied a modified DOS 2.5 that keeps retrying until the bus is free
Audio line Not passed through, so cassette recorders and a few direct-connect modems won't work. Atari's own modems were fine
Cables Ordinary SIO cables. Custom cables (sold separately) could put computers 100 feet or more from the peripheral cluster
Price $199.95 (1986)

Because every computer simply takes turns, MicroNet doesn't slow disk access once a machine has the bus. The cost is waiting. Students have to take turns booting software and printing. A modem session can tie up the bus indefinitely, and so can a long print job. Supra therefore recommended a printer buffer for each station, such as its own MicroStuffer, so a computer could dump its output and let go of the bus quickly.

There's no software arbitration or security at all. The computers can't see each other. There are no passwords, and nothing stops two users from writing to the same disk in turn. The reviewer imagined a lab of 24 130XEs sharing three MicroNets, three double-density drives and three buffered printers. He reckoned that could replace 21 printers and 21 drives and save perhaps $16,000.

History

MicroNet was a cheap answer to the "one drive per desk" problem. Later products took different approaches:

  • CSS Quintopus (1989) is an SIO port expander. Its switchable version lets two computers share one set of peripherals using toggle switches. See CSS Quintopus.
  • CSS Multiplexer routes the disk and printer I/O of up to eight "slave" computers through a master over the cartridge port, and lets them exchange messages. That makes it a real network. See CSS Multiplexer.
  • A2RI, the "automatic two-computer interface" built in 1994 by Thomas Grasel for the ABBUC regional group in Frankfurt, works on the same idea as MicroNet for two machines. It frees the bus about one second after a computer stops using it.

Using one today

  • Use DOS 2.5 or another DOS that retries on a timeout, or expect to retry by hand. Programs that boot straight from disk will fail if another station owns the bus at that moment.
  • Give each station a RAM disk and use the shared drives only for loading and saving, as reviewers of these devices advised.
  • If you only want to cut down cable juggling for one computer, a port expander like the Quintopus is simpler.

Credits