CSS Multiplexer (MUX)
- Year
- 1989
- Type
- Interface
- Category
- Cartridge-based local network for sharing drives and printers
- Manufacturer
- Computer Software Services (CSS); later run by Integrated Logic Systems
- Tags
- networking, multiplexer, css, cartridge, bbs, shared-storage, 6522-via, realdos
Overview
The Multiplexer (written "The MULTIPLEXER!" or "MUX" in some documentation) was Computer Software Services' answer to a common problem: several Atari computers that all need the same disks and printers. CSS's catalogue described it as "a collection of cartridge interface boards that allow up to 8 Ataris to read and write to the same drives (typically a hard disk), access the same printer(s), and talk to each other", and called it "the first practical networking system for the Atari 8-bit computer". It dates from around 1989.
How it's set up
- One master (host) computer, of any 8-bit model and any configuration, carries the master Multiplexer interface. The shared peripherals (hard disk, floppies, printers) connect here.
- Up to eight slave (client) computers each get a slave cartridge. Each cartridge has a pass-through slot on top, so the slave can still run BASIC, SpartaDOS X or other cartridges.
- On each slave, all disk and printer I/O is routed through the master, so slaves need no drives of their own. Peripherals can stay local on a slave, or be mapped to different device numbers on the master.
- Serial (R:) ports are not shared. Each computer keeps its own modem interface.
- Slaves are independent and don't need to run the same program.
Specifications
| Item | Value |
|---|---|
| Form factor | Cartridge with pass-through cartridge port |
| Network cable | 34-pin ribbon, like a PC floppy cable but without the twist |
| Topology | One host plus up to 8 clients (IDs set by switches, numbered 1-8 in the software) |
| Data bus | Shared 8-bit parallel, half-duplex, with handshake lines crossed between host and clients |
| CPU interface | One 6522 VIA at $D570-$D57F, chosen to coexist with SpartaDOS X's cartridge stack |
| Protocol | Host polls each client in turn; SIO requests and responses are forwarded over the bus |
How it works
The host software continually polls the eight client IDs by setting one bit at a time on the shared data bus. A client with a pending request sees its bit and signals back, and the host holds a "busy" line for the length of that command so other clients stay off the bus. Bytes are clocked across with the 6522's built-in handshake lines in a SCSI-like ready/acknowledge sequence. That makes transfers fast and keeps them reliable even when ANTIC's DMA delays the CPU. Clients can't talk directly to one another, because the handshake lines only cross between host and clients.
History
The Multiplexer was created at CSS by Robert Puff. Its assets were acquired decades later by Stephen J. Carden. His Integrated Logic Systems assembled a new run of cartridges, supported them from realdos.net, and included version 3.6 of the MASTER.COM host software in the RealDOS distribution. The assets later passed to another owner after his death.
Using one today
Altirra added emulation of the CSS Multiplexer, so it's possible to experiment with host and client software. Real hardware needs one cartridge per machine and the 34-pin cable. Remember that each client's own SIO serial devices stay local.
Credits
- comp.sys.atari.8bit FAQ (Michael Current), section 5.3.4 What local area network systems are there for the Atari? — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra Hardware Reference Manual, section 8.10 The Multiplexer — Avery Lee (Altirra)
- Altirra emulator release notes — Screenshot from Avery Lee's Altirra page, virtualdub.org
