Atari XC11 and XC12 Program Recorders

Year
1986
Type
Storage
Category
Cassette data recorder (XE series)
Manufacturer
Atari Corp. (XC12 made by Phonemark)
Grey Atari XC12 cassette recorder with built-in SIO cable

Overview

When Atari Corp. restyled its peripherals for the XE range, it replaced the 1010 with two cheaper cassette recorders. Both use the standard Atari tape format — 600-baud two-tone data on one stereo channel plus an audio channel — and computer motor control, so they read and write the same tapes as the 410 and 1010. Their big difference is power: neither has an adapter. They take 5 V from pin 10 of the SIO port, which all Atari computers supply except the 1200XL.

The XC11 came first, announced at the January 1986 CES and sold in the UK from early 1986 until summer, with only a very limited U.S. release in 1986–87. The XC12, based on the Phonemark PM-4401A, replaced it from mid-1986 and was distributed widely internationally, though never introduced in the U.S. In regions where disk drives were expensive or hard to get — notably Poland, Czechoslovakia, East Germany and South America — the XC12 and its clones were the everyday Atari storage device and the platform for a whole family of turbo loaders.

Specifications

Item XC11 XC12
Tape format Standard Atari: 600 baud FSK, about 100 KiB per 60-minute Type I cassette same
Connection Built-in SIO cable plus one free SIO port Built-in SIO cable only — must be last in the SIO chain
Buttons Record, Play, Rewind, Advance, Stop/Eject, Pause Record, Play, Rewind, F.Fwd, Stop/Ejt, Pause
Power 5 V DC from SIO pin 10 5 V DC from SIO pin 10
Origin Made in Japan Phonemark PM-4401A design (board marked "PM4401-4"), "round" cassette window
Released UK early 1986; very limited U.S. 1986–87 UK mid-1986; Europe, Latin America, Middle East

History

Atari packaged the XC12 into many regional bundles: the UK 130XE Starter Pack (with a joystick and a five-game compilation tape, £139.95 in late 1987), Dixons and Currys "65XE Home Computer Outfits" with compilation cassettes, the French XEGS keyboard pack XE 2012, and the Middle Eastern 65XE "Najm" package. After Atari stopped making the XC12, third parties continued the design using Atari-supplied parts — the XL12 (by Logical Design Works on Atari's behalf, sold in Chile and Eastern Europe), the XCA12 (California Access, sold especially in Poland) and finally the independently produced CA-12, plus Datamark-based look-alikes such as the XG12 and the Najm NA-R25/NC-60.

Turbo upgrades

Because tape was the main medium in these markets, many speed-up systems targeted the XC12 specifically. Examples include the Czech Turbo 2000 (hardware + software for the 1010 or XC12, about 2,270 bit/s), Poland's Atari Super Turbo (separate 1010 and XC12 versions, with AST Utility XC12 on cartridge in 1988), the East German Turbo 6000 (6000 baud) and the Argentine/Chilean Fast Injektor (4000 baud), which Coelsa sold pre-installed in XL12 units. The UK Rambit TurboCharger also supported the XC11 and XC12. The usual technique is to bypass the recorder's FSK filters so the computer can write its own, faster signal, often switched by the SIO command line.

Using it today / Known issues & tips

  • 1200XL owners: neither recorder works on a stock 1200XL, because its SIO pin 10 provides no power. The documented fix is to replace resistor R63 with a 0–1 Ω part or a jumper.
  • Chain order: put an XC12 at the end of the SIO chain; the XC11 can sit in the middle.
  • Turbo tapes need the matching modification (and usually a loader cartridge or boot tape); an unmodified XC12 reads only standard-format tapes.
  • Loading works as on any Atari recorder: CLOAD, RUN "C:", or hold START at power-on (plus OPTION on XL/XE to disable BASIC) for boot tapes.

Credits