Third-Party Program Recorders and Cassette Interfaces
- Year
- 1983
- Type
- Storage
- Category
- Cassette recorders, clones and tape-deck interfaces
- Manufacturer
- Various (General Electric, Phonemark, Datamark, California Access/LDW, Micro Systems and Software, others)
Overview
Most home computers of the early 1980s could save to any cheap cassette recorder. The Atari couldn't. Its program recorders don't just record audio: they decode the FSK tones into data and talk to the computer over the SIO bus, and the computer switches the motor through the SIO cable. So you needed an Atari-specific recorder (the 410, 1010, XC11 or XC12) or one of a small group of third-party alternatives. Those alternatives fall into two groups: Atari-compatible recorders made by other companies, and interfaces that let a normal tape deck stand in for a program recorder.
Atari-compatible recorders
| Recorder | Notes |
|---|---|
| GE Compu-Mate Computer Data Recorder (3-5148A) | General Electric's battery- or mains-powered deck, with a switch for "Atari" or "All other computers". It connects through the 3-5149A Atari/Commodore Interface Module (IFM) on a pair of cables. Mono only, so no audio track for talking tapes. No second SIO port, so it must go at the end of the chain. Antic reviewed the "G.E. Compu-Mate Data Recorder" |
| Phonemark PM-4401A | The "round window, notched lid" design that Atari itself sold as the XC12. Phonemark also built it under other names: a Datamark XG12, a TurboData unit, and the XL12 made for Logical Design Works (LDW) for Atari |
| XL12 / XCA12 / CA-12 | Successors to the XC12, made after Atari stopped making its own. The XL12 used parts supplied by Atari and was sold in Chile by Coelsa, Atari's official importer, and in Eastern Europe. The XCA12 carried LDW's California Access brand and was sold mainly in Poland. The CA-12, also California Access, was built independently of Atari once the Atari parts ran out. Its board is still marked "P.M. 4401-5" |
| Datamark DM-6402A family | A "square window" design. It appears as the Datamark XG12, as a second XL12 variant ("Datarecorder For Atari Computer DM-6402A" on the base), and as the Najm NA-R25 / NC-60 packed with later Arabic-market 65XE "Najm" bundles |
| Datamark DM-1301A | Similar size to the Phonemark, styled with XE-like slanted lines; box with red stripes down both sides |
| Taihaho Computer Cassette | Sold in 120 V (red) and 240 V (black) versions, with built-in SIO cable and a power supply that plugs straight into the wall |
Like Atari's own XC12, none of these clones has a second SIO socket, so each one has to be the last device on the chain.
Interfaces for ordinary tape decks
| Interface | Notes |
|---|---|
| ACI-3 / AC113 Cassette Interface (Micro Systems and Software, Denver, 1983) | $44.95. Plugs into the SIO port and connects any mono or stereo cassette recorder as a 410 replacement. Antic's July 1983 notice said its phase-locked-loop design should allow up to 1200 baud with suitable software. Antic printed a corrected ordering address in January 1984 |
| Crystal Cable Company TIC-600 | Tape interface and controller for reel-to-reel, 8-track, VCR or cassette. Auto mode starts and stops the tape; manual mode uses the deck's own buttons. 900 baud, upgradable to 1200. Kit or assembled |
| W.E. Electronics Cassette Interface (UK) | SIO interface with leads for a portable recorder or a hi-fi deck, including motor control where the recorder supports remote |
| K.S.O. 2T06 Turbo (Poland, 1988) | Wojciech Zabołotny's design, published in IKS 11/1988. It uses joystick port 2, works with any cassette recorder and has its own cassette operating system. See Turbo 2000 for the turbo-tape scene |
| Turbo 2600 Interface (Zakład Elektroniczny SZOK, Poland, 1989) | Works with any cassette recorder, including Atari ones; popularised by the Radiokomputer broadcasts in 1989 |
Using them today
- Clone recorders behave like an XC12, so standard tapes load with no tricks. The common faults are the same as on Atari's decks: stretched belts and dirty heads. See Atari XC11 and XC12.
- Polish and Chilean units often come with a turbo system already fitted. If an XL12 or CA-12 won't load normal tapes reliably, check whether a turbo board has been added or the head alignment has been changed for turbo recordings.
- Interfaces for standard decks are mainly curiosities now. If you want to load from ordinary audio, a PC or phone playing WAV files through a simple SIO cable, or an SD-based device with tape emulation, does the same job more reliably.
Credits
- comp.sys.atari.8bit FAQ (Michael Current), 3.1.2 What other cassette recorders can I use with my Atari? (contributor Tomasz Krasuski) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 4 (July 1983), New Products: AC113 Cassette Interface — AtariMagazines.com (Kevin Savetz), 1983
- Antic Vol. 2 No. 10 (January 1984), New Products: ACI-3 Cassette Interface address correction — AtariMagazines.com (Kevin Savetz), 1984
- Gury's Atari 8-bit Forever portal — ACI-3 Cassette Interface — Gury (Atari 8-bit Forever portal)
