Atari 1050 Disk Drive

Year
1983
Type
Storage
Category
5.25-inch floppy disk drive (single / enhanced density)
Manufacturer
Atari, Inc. / Atari Corp. (made by Atari-PCI, Singapore, and Atari Hong Kong)
Atari 1050 floppy disk drive

Overview

Introduced at the West Coast Computer Faire in March 1983 and shipping by June, the 1050 replaced the 810 as Atari's standard disk drive and became the most common Atari drive of the XL/XE era. It reads and writes 810 single-density disks unchanged, and adds a new mode Atari called "double density": 26 sectors of 128 bytes per track, 1,040 sectors and 130 KiB per side, recorded with MFM encoding. Because it is not the 180K double density (256-byte sectors) used by Percom-standard third-party drives, Atari users call it enhanced or dual density. The 1050 is still a single-sided, single-head drive.

Specifications

Item Detail
Formats Single density: 40 × 18 × 128 = 92,160 bytes; enhanced density: 40 × 26 × 128 = 133,120 bytes
Encoding / rate FM at 125,000 bit/s (disk), MFM at 250,000 bit/s; SIO at the standard 19,200 baud
Rotation 288 RPM ±3%
Access Track-to-track 40 ms max; head settle 30 ms; motor start up to 1 s
Controller 6507 at 1 MHz, custom 2732 ROM, 6810 RAM, 6532 RIOT, Western Digital WD2793 FDC (WD2797 in late 1985 units, which need ROM Rev. L)
Mechanism Tandon (Singapore units) or World Storage Technology (Hong Kong units); horizontal slot with turn-latch
Connection 2 SIO ports; drive 1–4 switches on the back
Power 9 V AC (Atari CA017964); 15 W standby, 30 W operating, 50 W at start-up

History

The 1050 was built in Singapore by Atari-PCI from May 1983 to December 1984 (the common version), at Atari's Hong Kong plant from November 1984 to February 1985, and again in Singapore from October 1985 to January 1986. Tom Palecki designed the case. Its bundled DOS tells the story of Atari's software problems: 1983 units shipped with DOS 2.0S, which cannot use enhanced density at all; 1984 to early 1985 units shipped with DOS 3, which uses its own, incompatible file system; from spring 1985 Atari switched to DOS 2.5 by Optimized Systems Software, which keeps the DOS 2 file system and adds enhanced density (1,010 usable sectors, about 126 KB) plus the 130XE RAM disk. Antic's July 1983 report had promised double-density operation "under the new DOS 3.0".

Documented ROM revisions (J in 1983, K in 1984, an alternate K from Hong Kong, L in 1985–86) have no practical differences, though Revs. H and J switch the motor on before reporting a missing disk while K and L do not. Unlike the 810, the 1050 senses disk insertion through the latch and automatically detects whether a disk is single or enhanced density.

Using it today / Known issues & tips

  • Use DOS 2.5 (or a later third-party DOS) for enhanced density. DOS 2.0S sees only single density; Files on DOS 3 disks can be moved across with the COPY32.COM utility supplied with DOS 2.5.
  • Close the latch (turn it 90° clockwise) after inserting a disk; the drive will not see the disk otherwise.
  • Late WD2797 drives must keep a Rev. L ROM — fitting an older ROM leaves them non-functional.
  • Upgrades. The 1050 was the most-modified Atari drive: ICD's US Doubler (1984: true 180K double density plus "UltraSpeed" high-speed SIO, initially supported by SpartaDOS), the Happy 1050 Enhancement and Maximizer, the Speedy 1050, the Archiver/Super Archiver and many others. Upgraded drives gain 180K double density and much faster loading with supporting DOSes.
  • Emulation. Altirra provides both standard and full (firmware-level) 1050 emulation, including Happy and Speedy variants, and warns when you try to use a double-sided image that a real 1050 could not read.

Compatibility

Works with every 8-bit Atari computer. Single-density disks interchange with 810s; enhanced-density disks interchange with XF551s and most third-party drives that support the 1050 mode.

Credits