Atari 1010 Program Recorder
- Year
- 1983
- Type
- Storage
- Category
- Cassette data recorder
- Manufacturer
- Atari, Inc. (made by Sanyo, Japan, and Chelco Sound, Hong Kong)
Overview
The 1010 replaced the 410 as Atari's cassette drive when the XL computers arrived. It was announced with the 1200XL at New York's Plaza Hotel in December 1982 (promised for winter 1983 at $99) and shipped in March 1983 at $99.95. Electrically it records and plays exactly the same Atari tape format — 600-baud two-tone data on one stereo channel, ordinary audio on the other — so every 410 tape loads on a 1010 and vice versa. The changes are practical: a low, XL-matching case, two SIO ports so the recorder no longer has to sit at the end of the peripheral chain, and a small external power pack instead of a transformer inside the case.
Specifications
| Item | Detail |
|---|---|
| Data format | Standard Atari cassette format: 600 baud FSK (5327 / 3995 Hz), about 100 KiB per 60-minute tape |
| Tape | Type I compact cassette, 1.875 in/s, computer motor control |
| Connection | 2 SIO ports; shipped with a 3-ft SIO cable (CA014122) |
| Buttons | Record, Play, Rewind, Advance, Pause, Stop/Eject (Sanyo order; Chelco swaps Pause and Stop) |
| Power | 9 V AC from Atari C061515 / C061516 adapter (or CA014748 / CA017964); about 3 W |
| Versions | 1010S (Sanyo, Japan, FCC ID BPA99H1010, orange sticker in cassette bay); 1010C (Chelco Sound, Hong Kong, FCC ID BPA7YJ1010, silver sticker) |
| Produced | 1983–1984 |
History and reception
Carl Evans took a 1010 apart for his "Tape Topics" column in Antic (July 1983). He praised the packaging — detachable internal connectors for easier servicing, a case that finally matched the disk drives, the separate power pack, and above all the two I/O ports, which he argued would reduce noise for owners who also had disk drives. But he found the playback circuit "basically the same" as the 410's, with only tighter-tolerance resistors in the filters, and concluded that it was "a slight improvement over the 410" rather than a reason for 410 owners to upgrade. He was also puzzled by the power LED, which on early units lights whenever the adapter is plugged in; later production units light it only after PLAY, REWIND or ADVANCE is pressed, and Evans published a one-wire modification to get the same behaviour.
The 1010 was bundled in the UK "800XL 64K Personal Computer Pack" with An Invitation to Programming 1 and a Pole Position/demo tape, and in French "Kit Éducation" and "Kit Programmation" packages. It was replaced by the XC11 and XC12 from 1986.
Using it today / Known issues & tips
- Head alignment. Evans noted the alignment access hole is hidden under a strongly glued label plate above the buttons — expect to damage the plate if you remove it.
- Loading and saving work exactly as on the 410:
CLOAD/CSAVE,LOAD "C:"/SAVE "C:",ENTER "C:"/LIST "C:", and START-at-power-on for boot tapes (one beep = press PLAY, two beeps = PLAY+RECORD, then RETURN). - Turbo systems. In regions where cassettes stayed popular, many speed-up modifications were made for the 1010 and its successors — for example the Czech Turbo 2000 (about 2,270 bit/s originally) and the Polish Atari Super Turbo, which had separate versions for the 1010 and the XC12. The typical approach is to bypass the FSK filters, often switched by the SIO command line.
- Power. Unlike the XC11/XC12, the 1010 has its own adapter, so it works on the 1200XL.
Credits
- Picture: Atari 1010 Program Recorder. — Bilby, via Wikimedia Commons (CC BY 3.0)
- comp.sys.atari.8bit FAQ (Michael Current) — sections 3.1.1, 3.1.3, 7.2.2, 11.1 — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 4 (Jul 1983) — Tape Topics: Ten Ten, a look inside the new recorder (Carl Evans) — AtariMagazines.com (Kevin Savetz), 1983
- Altirra Hardware Reference Manual — §9.17 410/1010 Program Recorder — Avery Lee (Altirra)
