Atari 1029 Programmable Printer

Year
1984
Type
Peripheral
Category
Printer (80-column dot-matrix impact with graphics, SIO)
Manufacturer
Atari Corp. (Seikosha GP-500-type mechanism, made in Japan)
Atari 1029 dot-matrix printer

Overview

The 1029 arrived just as Jack Tramiel's new Atari Corp. took over the business in 1984. When the company restarted shipping in quantity in October 1984, the 1029 was the new product it sent to the UK and Europe alongside fresh 800XLs and 1050 drives. It was never sold in the United States — only a 120 V version for Canada and 220–240 V versions for Europe and the UK — but it stayed in Atari's European line for years: it was on sale in France in 1985–86 (1,490 F in early 1986) and promoted with the new 800XE in West Germany in 1987.

Unlike the text-only 1025, the 1029 has a bit-image graphics mode, so it can print screen dumps and pictures as well as text. It connects directly to the SIO bus, so no interface is needed. The case was designed by Tom Palecki, and the mechanism is a Seikosha GP-500 type.

Specifications

Item Detail
Print method 5×7 dot-matrix impact
Formats Regular 10 cpi (80 columns); elongated 5 cpi (40 columns)
Line spacing 6 lpi for text, 9 lpi for graphics (adjacent rows)
Speed 50 characters per second at 10 cpi
Character set 132 characters including international set
Paper feed Friction and pin (tractor) feed; fan-fold 4.5–9.5" wide or 8.5" single sheets
Controller 8039 (8048-family) microcontroller at 10 MHz, 4 KiB external ROM
SIO Answers as P1: ($40) and P6: ($45)
Connection 2 SIO ports, 3-ft SIO cable included
Self test Rear-panel switch
Power 120 V AC (Canada) or 220–240 V AC (Europe/UK)
Ribbon Atari C070028 (10-inch model ribbon)

Escape codes

All 1029 escape codes can be used anywhere in a line, unlike the 1025's:

Code Effect
ESC CTRL-N / ESC CTRL-O Elongated (5 cpi) on / off
ESC CTRL-Y / ESC CTRL-Z Underline on / off
ESC CTRL-W / ESC CTRL-X International characters on / off
ESC 9 / ESC 6 9 lpi / 6 lpi line spacing
ESC CTRL-A Enter bit-image graphics mode (data bytes drive the seven print wires directly)
10 LPRINT "NORMAL ";CHR$(27);CHR$(14);"WIDE";CHR$(27);CHR$(15);" NORMAL"
20 LPRINT CHR$(27);CHR$(25);"UNDERLINED TEXT";CHR$(27);CHR$(26)

Using it today / Known issues & tips

  • No paper sensor. The 1029 never reports an out-of-paper error, and its status reply is a fixed canned value; sending a status request also resets it to defaults (underlining, international characters, elongation, bit-image mode off, 6 lpi).
  • Don't use 820 sideways mode with it: the printer still expects 40-byte data frames and the OS will report error 138 (timeout).
  • Characters without descenders. The 5×7 cell has no descender space, so letters like g and q sit raised on the line — expected behaviour, not a fault.
  • Polish firmware. Two firmware versions are known: English, and a Polish version with a localised character set.
  • Emulation. Altirra emulates the 1029, so print routines can be checked without the hardware.

Credits