Atari CPS SuperSALT Diagnostic Test Kit
- Year
- 1984
- Type
- Peripheral
- Category
- Service-centre diagnostic cartridge and test fixture (1984)
- Manufacturer
- Atari, Inc. (Consumer Product Service)
- Tags
- atari-inc, service, diagnostics, salt, supersalt, test-equipment, cartridge, repair, consumer-product-service, xl-series, atari-800
- Related
- Atari Service: Authorized Service Centers, Service Contracts and Tech Tips, Atari 1020 and 1027 Printer Field Service Manuals, Atari 1200XL Field Service: Testing, Symptoms and Tech Tips, Atari 600XL Field Service Troubleshooting, Atari 800XL Troubleshooting (Electronic Dimensions Service Manual), The Atari 8-bit Timeline, 1977–1992
Overview
Atari's service technicians did not test a returned computer by playing games on it. From 1979 they used SALT — Stand Alone System Test — diagnostic cartridges, and in early 1984 Atari Consumer Product Service (CPS) released their final form, the CPS SuperSALT Diagnostic Test Kit (FK100331). Atari described it as "the latest version of the Stand-Alone-Test hardware and software developed for testing and troubleshooting ATARI Home Computers". Unlike the Self Test built into XL computers, SuperSALT came with a dedicated test box, so it could check the parts of a computer that software alone cannot see: the controller ports, the SIO port's signals and the machine's supply voltages.
What was in the kit
| Part | Description |
|---|---|
| FA100332 | SuperSALT Diagnostic Test Assembly — the test box |
| FD100335 | SuperSALT Diagnostic Cartridge (title screen: "CPS SUPER SALT 400/800/1200 DIAGNOSTIC", Rev. A) |
| FA100336 | AC jumper cable assembly |
| FA100765 | Dual 9-pin cable, 30 inches |
| CA014122 | Serial I/O (SIO) cable |
| FD100770 | CPS SuperSALT Technical User's Manual (Rev. 01, February 1984) |
The test assembly
The test box is a small cased circuit board with four 9-pin I/O ports, a 13-pin SIO port, a tone switch, a power switch, a DC power input and an AC power pass-through for the 400/800/1200XL's transformer. It acts as an analogue-to-digital converter and data-switching unit: it loops signals from one controller port back to another so the cartridge can check every line, converts analogue signals and voltage levels into numbers, and returns the results to the computer over SIO. Inside are a precision power supply, an ADC, a current-to-voltage converter, interfaces for the joystick jacks, and a serial-port tester built around a baud-rate generator (driven by a 1.8432 MHz master clock, giving 300 to 19,200 baud) and a hard-wired test byte ($55) it can send into the computer. A motor-control input with added filtering lets it measure the cassette-motor line too.
Hookup differed by model:
- 400/800: all four controller ports were cabled to the box, the SIO port connected, and the computer's 9 V AC adaptor plugged through the box's pass-through; tone switch toward the controller ports.
- XL series (the manual lists the 600XL, 800XL and 1450XL): only ports 1 and 2 were connected, each machine used its own power supply, and the tone switch was set the other way.
The software
The cartridge recognises the machine — its Executive Menu shows, for example, "1200 64K" — and offers five functions:
- Performance Test — a fixed sequence that must be run first: two-way clock, 6502 test, ANTIC stress test, grey-bar and colour-bar tests, GTIA diagnostics, I/O port tests, OS ROM checksum, RAM test, tone test, video test and external audio.
- Extended Unit Test — the same idea, but the technician can add, remove and reorder tests.
- Individual Tests — loop a single test, for example while probing a suspect chip with an oscilloscope.
- Change Test Opts — continuous or single pass, sequential or random order, display time from 2 to 20 seconds (or "RTN" to wait for RETURN), and test groups.
- Show Err Summary — error counts per test, cleared by SYSTEM RESET.
The manual pairs each test with symptoms and fixes; if the two-way clock test produces no tones despite correct hook-up, for instance, it directs the technician to replace POKEY.
Context
SuperSALT arrived in early 1984, a few months before Atari, Inc.'s home computer business passed to Jack Tramiel's Atari Corp. Earlier SALT cartridges had been part of each service centre's kit since 1979 — the 400/800 service manual even used SALT's colour-bar screen to set the colour adjustment.
Today
The manual is explicit that the Performance Test requires the test assembly, so a cartridge on its own is of limited use; with the box, SuperSALT remains the most thorough Atari-made test for a 400, 800 or XL. For a quick check without special hardware, the XL/XE's built-in Self Test covers memory, sound and keyboard.
Credits
- Picture: The SuperSALT Test Assembly, from Figure 1-1 of the CPS SuperSALT Technical User's Manual (FD100770, February 1984). — Figure 1-1 of the CPS SuperSALT Technical User's Manual FD100770 Rev. 01 (Atari, February 1984), scan in the local Atari documents collection (Fair use (manual illustration))
- comp.sys.atari.8bit FAQ (Michael Current) — 11.1 timeline (Feb 1984: CPS SuperSALT kit FK100331; SALT cartridges since 1979) — Michael Current (comp.sys.atari.8bit FAQ), 1984
- Altirra Hardware Reference Manual — 6.2 (400/800 Service Manual's SALT colour bars) — Avery Lee (Altirra)
