Atari Service: Authorized Service Centers, Service Contracts and Tech Tips

Year
1983
Type
Vendor
Category
Atari's repair network, warranty, service contracts, diagnostic kits and technical bulletins (1979–1984)
Manufacturer
Atari, Inc. (Consumer Product Service)
Typed page headed 'Announcing the Atari Service Contract Program', listing benefits for consumers and servicers

Overview

Behind the 8-bit computers stood Atari Consumer Product Service (CPS) in Sunnyvale, California, which ran a national network of independent Factory Authorized Service Centers. Atari's 1983 policy and procedures manual for those centres survives, and together with the dates of Atari's technical bulletins it shows how a broken 400, 800 or 810 was handled in the early 1980s — and why some machines today carry service-centre modifications.

The warranty

Atari, Inc. warranted its "Personal Computer Products" for 90 days from purchase against defects in materials and workmanship. Repairs had to be done by an authorized Atari Service Center; the warranty was void if the unit had been misused, damaged by non-Atari products, or serviced or modified by anyone else. Software was sold "as is" with no warranty at all.

The service centre network

Welcoming a new centre in January 1983, CPS promised "technical manuals, training and on-site field contacts", with news of the latest changes delivered through "Tech Tips". Centres were reimbursed by Atari at flat rates for warranty work. For the 400/800 range the 1983 schedule paid, for example:

Product Component-level major repair Minor repair Board exchange No trouble found
400 computer $45.00 $20.00 $20.00 $20.00
800 computer $50.00 $20.00 $20.00 $20.00
810 disk drive $50.00 $20.00 $20.00 $20.00
410 recorder $17.50 $7.50 — $7.50
820 printer $25.00 $15.00 — $15.00

For the 822 and 825 printers and the 830 modem the schedule listed only "no trouble found" and package-and-return fees. The 850, the CX801 personality module and the CX852/CX853 memory modules paid $25 for a component-level repair or $7.50 for a board swap, and replacement boards were released only for specific problems approved through Atari's technical support hotline. Joysticks, paddles, power adaptors, the TV switch box and even the BASIC cartridge were exchange-only items ($3 each), while the CX85 keypad could be repaired. Centres had to guarantee their own work for 30 days.

The Atari Service Contract

From January 1983 Atari offered consumers service contracts on all its hardware. A contract holder got free parts and labour, an authorization card for the system, and access to the authorized centres, and could buy the contract from a participating dealer, by mail-order form or by toll-free phone call. Centres were paid more for contract work than for warranty work — $70 instead of $50 for a component-level 800 or 810 repair, $63 instead of $45 for a 400. Atari later sold a boxed contract (C062066 / BX4216) giving one year's cover for a 600XL or 800XL, its switch box and power adapter; it was sold only in the USA and only in 1983.

Diagnostic kits

Technicians tested machines with Atari's own diagnostic media. SALT (Stand Alone System Test) cartridges were produced for service technicians from 1979; the 400/800 service manual even uses SALT's colour-bar pattern for adjusting the colour trimmer. The HCD Diagnostic Kit for the 410, 810 and 850 (FK100042, $116 to an authorized servicer) contained a 410 diagnostic tape and scratch disk, an 810 diagnostic cartridge, alignment disk and work diskette, an 810 side board with data separator, and the field service manuals for all three devices. In early 1984 CPS released the CPS SuperSALT Diagnostic Test Kit (FK100331), consisting of a Diagnostic Test Assembly and a Diagnostic Cartridge.

Tech Tips

The numbered Tech Tips bulletins told centres about known faults and approved fixes. Several are still cited today because they explain features of surviving hardware:

  • Tech Tip 5 (17 November 1982): pressing RESET on a 400/800 does not clear POKEY's data output line, so a following CSAVE can record garbage; it also covers the noise problem with newer Transtek-built 410 recorders that led Atari to remaster all its cassette software by 1 March 1982.
  • Tech Tip 18A (29 September 1983): authorised service centres to upgrade the 1200XL from XL OS Rev. A to Rev. B (ROMs C060616B and C060617B) — the reason some 1200XLs report revision 11.
  • Tech Tip 20 (17 August 1983): concerns XL machines shipped with the older ANTIC chips — the first 24,000 PAL 600XLs had the PAL "A" ANTIC (C014887) instead of the "B", and possibly some early NTSC 800XLs had the original C012296.

Today

Atari's flat-rate network vanished with Atari, Inc. in 1984, but its paperwork lives on: field service manuals, SALT cartridges and Tech Tips are the basis of much modern repair knowledge. If a machine has an unexpected OS revision, a data-separator board or a replaced ANTIC, a 1980s service centre may be the reason.

Credits