Atari-Ready Third-Party Printers (Axiom/Seikosha, Alphacom, Okimate, Epson HomeWriter)

Year
1983
Type
Peripheral
Category
Printers with built-in Atari SIO interfaces
Manufacturer
Various (Axiom/Seikosha, Alphacom, Okidata, Epson, Comrex, General Electric)
A white dot-matrix printer with fan-fold paper, a row of front-panel buttons and an attached cable ending in an Atari SIO plug

Overview

Most good printers of the early 1980s had a Centronics parallel input, so an Atari owner needed an 850 interface or a third-party adapter (see third-party printer interfaces). A smaller group of printers were sold ready for the Atari. They had an SIO cable and Atari protocol built in, or came with an Atari interface cable, so they plugged into the peripheral chain and worked with the OS's normal P: handler. Atari's own printers worked the same way (see the 1025, 1027 and 1029). This page covers the others.

The printers

Printer Type Atari connection Notes
Axiom GP-100AT ("AT-100", Seikosha) (1983) 80-column dot matrix, 5×7 font Built-in Atari cable; second SIO port The first Atari-specific third-party printer. A Seikosha GP-100A set up for the Atari; the same printer was sold as the Gorilla Banana and Panasonic JR-P02U, but those versions don't work directly with an Atari. $299. Early units 30 cps, later 50 cps
Axiom GP-550AT ("AT-550") Dot matrix, draft and near-letter-quality Built-in cable; second SIO port Rated 86 cps draft and 43 NLQ. In Antic's 1986 timing test it managed about 34 cps over SIO. Axiom called it one of the quietest impact printers available
Axiom GP-700AT ("AT-700") Four-colour dot matrix Built-in cable; second SIO port Four hammers and a black/magenta/cyan/yellow ribbon cassette, up to 25 colours, 80 columns; $599 in October 1984
Seikosha GP-500AT 80-column dot matrix, 50 cps Two SIO ports 60-dpi graphics, international characters; sold widely in Poland, as the Comrex CR-220AT (1985), and by Atari itself as the 1029
Alphacom 42 Thermal, 40 columns on 4½-inch rolls "Intelligent Interface Cable"; must be last on the chain $99.95 with cable in 1984. Prints the full ATASCII set, including inverse and graphics characters, using a ROM in its interface
Alphacom 81 (1983) Thermal, 80 columns, 8¾-inch paper, 100 cps Interface cable; end of chain The wider sibling, with the same full-ATASCII support
Okidata Okimate 10 Thermal-transfer colour, 26 colours Plug 'n Print interface with two SIO ports $235 in 1986. Readers ranked it among the ten most-owned printers in Antic's 1986 survey. Broderbund said Print Shop didn't support it
Epson HomeWriter 10 / GX-80, Spectrum LX-90 Dot matrix, 100 cps draft, 16 cps NLQ Plug-in Printer Interface Cartridge (PIC), $50 in 1985 The PIC makes the printer emulate an Atari 1025, so there are no graphics through it. The printer was $249
GE TXP-1000 (GE 3-8100) Thermal, 50 cps draft, 25 cps letter quality GE 3-8150A interface for Atari and Commodore Antic once called it dot matrix; it's thermal

Reviews and reputation

Antic's January 1984 printer survey tested two of these. The Alphacom 42 was "a small utility printer that offers good value — if you can accept its limitations". It was quiet, did about 80 characters a second, and printed Atari graphics characters exactly. But its thermal paper (blue or black image, about $3 a roll) didn't photocopy well in blue. It printed every control character as a symbol, which ruined word processor output, and it took no standard-size paper. The Axiom AT-100 was "slow and noisy". It used only fan-fold paper and its font lacked true descenders, and in Antic's benchmark its one-second carriage return dragged the rated 30 cps down to about 17. Still, the reviewer judged it a good "starter" printer because it didn't need the "expensive and hard to find" 850. Axiom offered GraphAX ($15) for better graphics dumps, plus BASIC screen-dump routines, and its president wrote in to say the production model had already been sped up to 50 cps.

Using them today

  • No interface needed. Built-in Atari printers work with any program that prints to P:, including AtariWriter, BASIC LPRINT and most utilities. Graphics are another matter. Programs need a driver for the specific printer (Print Shop drivers, Graph-AX, or modern dump utilities).
  • End-of-chain models (Alphacom, Epson PIC) must be last in the SIO chain because they have no pass-through socket.
  • Consumables are the main problem. Thermal paper for the Alphacoms and ribbons for the Okimate 10 and GP-700AT are scarce. Modern emulated printers, such as the virtual printers in FujiNet, are a practical substitute for everyday printing.

Credits