Atari 822 Thermal Printer
- Year
- 1980
- Type
- Peripheral
- Category
- Printer (40-column thermal, roll paper)
- Manufacturer
- Atari, Inc. (made by Trendcom)
Overview
The 822 was Atari's low-cost alternative to the 820 impact printer. Instead of striking a ribbon, its print head heats spots on chemically treated paper, so it has no ribbon to buy and makes little noise. Like the 820 it prints 40 columns of 5×7 dot-matrix characters on a narrow roll and plugs straight into the Atari SIO bus, where the operating system's built-in P: device drives it with no extra software. Unlike the 820 it can also print simple point graphics.
Atari introduced the 822 at the Summer Consumer Electronics Show in June 1980 at $449.95 — $150 less than the 820's list price — and shipped it in the autumn of 1980, the same season as the 825 printer, 830 modem and 850 interface. The mechanism was a Trendcom 100, and Trendcom built the printer for Atari in the United States.
Specifications
| Item | Detail |
|---|---|
| Print method | Thermal dot matrix, 5×7 characters |
| Line length | 40 characters, 10 characters per inch |
| Speed | 37 characters per second |
| Characters | Upper and lower case, plus point graphics |
| Paper | 4 7/16-inch white thermal paper; Atari pack C016345 = 2 rolls of 80 feet; one roll and spring-loaded paper bearings supplied |
| OS device names | 400/800 OS: P: (device number ignored); XL OS: P: and P1: |
| Connection | 2 SIO ports; 3-ft SIO cable included |
| Power | 9 V AC via the Atari CA014748 adapter (or CA017964); 18 W |
| Mechanism | Trendcom 100 |
| Manual | Atari 822 Thermal Printer Operator's Manual C015954 |
History
The 822 belongs to the first wave of Atari peripherals designed for the 400 and 800, all sharing the same SIO interface. It was one of the devices originally shipped with the early 20 W version of Atari's CA014748 9-volt power adapter, along with the 400, 800, early 810s and the 850. It was replaced in the XL era by the 1020 colour printer/plotter, which also uses narrow roll paper, and by dot-matrix printers such as the 1025.
Narrow-paper printers like the 820, 822 and 1020 inspired some creative type-in programs: Antic's "Pocket Calendars for 1984" (January 1984) noted that their roughly four-inch-wide strips were just the right size for a fold-up wallet calendar.
Using it today / Known issues & tips
- Paper. The 822 needs thermal paper of the right width; plain paper will not print.
- Labels. As Antic's "Christmas Mailing Lister" pointed out, there is no ready-made label stock for thermal printers — print on the roll and cut and paste instead.
- Software. Anything that prints through the standard P: device works:
LPRINT,LIST "P:", and the print options of most 40-column-aware programs. Software that sends 80-column lines or printer-specific control codes (Epson-style graphics, for instance) will not format correctly. - Power. It uses the 9 V AC transformer of the 400/800 family, not a DC supply.
- Compatibility. Works on every 8-bit Atari via SIO; on XL/XE computers it answers to P: or P1:.
Credits
- Picture: Atari 822 Thermal Printer. — Martin Meyer / atari-computermuseum.de, via Gury's Atari 8-bit Forever portal (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 10 (Jan 1984) — Pocket Calendars for 1984 — Bill Lukeroth, 1984
- Best of Antic Vol. 1 — Christmas Mailing Lister — AtariMagazines.com (Kevin Savetz)
- Gury Atari 8-bit Forever — Atari 822 Thermal Printer — Martin Meyer / atari-computermuseum.de, via Gury's Atari 8-bit Forever portal (Unknown, used for identification)
