Atari 1027 Letter Quality Printer

Year
1983
Type
Peripheral
Category
Printer (letter-quality type-wheel impact, SIO)
Manufacturer
Atari, Inc. (Mannesmann Tally Riteman LQ mechanism, made in Japan)
Atari 1027 letter-quality printer

Overview

The 1027 brought "typewriter-quality" printing to Atari owners for well under the price of a daisy-wheel printer. Introduced at the June 1983 Summer CES and shipped that autumn, it plugs straight into the SIO bus, needs no interface or special cable, and prints solid, fully formed characters in Prestige Elite at 12 characters per inch — 80 columns on a standard 8½-inch sheet. That made it the natural partner for AtariWriter: Atari sold the two together, along with a 600XL, in the KX7110 AtariWriter System All-In-One-Pak.

The mechanism is unusual. Antic's January 1984 printer survey described it as a revival of teletype technology: five type wheels on a spindle spin over the paper, the correct wheel is stopped at the right character and pressed onto the page, and the characters are inked continuously from an ink roller rather than a ribbon.

Specifications

Item Detail
Print method Letter-quality type-wheel impact, ink roller (no ribbon)
Font Prestige Elite, 12 pitch (12 cpi), 80 columns
Speed 20 characters per second best case, about 10 cps average
Features Bi-directional printing, underlining, international characters
Paper Single sheets up to 8½" (no roll paper or labels)
Controller Intel 8049 microcontroller
OS device names 400/800 OS: P:; XL OS: P:, P1:, P5:
Connection 2 SIO ports, 3-ft SIO cable included
Power 9–9.5 V AC from Atari C061636 or C061605 adapter
Mechanism Mannesmann Tally Riteman LQ
Consumable Replacement ink roller CA061649

History and reception

Antic's January 1984 survey put the 1027 at $349 — less than half the price of the Epson FX-80 in the same test — and liked its typewriter-like output, its accent marks for European languages and the fact that cartridge word processors could print straight from memory without a disk drive. It was far less happy with speed: the 1027 needed more than nine minutes to type copy most dot-matrix printers finished in one, and the mechanism "looks and sounds like it will go berserk at any minute", though it did not fail during the test. The verdict: a reasonable choice "for limited uses in which speed is not important, but the appearance of the output is."

Owners bought it anyway. In Antic's February 1986 reader survey the 1027 tied for eighth place among the most widely owned printers (5.8%), ahead of the 1025, even though readers rated it lowest of the top ten (2.6 out of 5). Atari kept it in the XE-era line, offering a $399 130XE bundle with a 1027, a 1050 and software in January 1986, and selling it in France (2,600 F in 1985). The product manager was Margaret Harrison.

Using it today / Known issues & tips

  • Working units are rare. The print heads appear to deteriorate with age, to the point that there may be no fully working 1027s left today.
  • Ink rollers, not ribbons. Antic's 1989 article on re-inking ribbons for thermal printers explicitly warned against home-made substitutes for the 1027: "You really must have the proper ink rollers."
  • Software. AtariWriter and its successors support the 1027 directly. Programs that need graphics or proportional spacing cannot use it.
  • Paper. Atari specified single sheets only (no roll paper or label stock), fed by hand.

Credits