Atari 1025 80-Column Printer

Year
1983
Type
Peripheral
Category
Printer (80-column dot-matrix impact, SIO)
Manufacturer
Atari, Inc. (Okidata mechanism, made in Japan)
Atari 1025 dot-matrix printer

Overview

The 1025 gave Atari owners a full-width printer that, unlike the earlier 825, plugs straight into the SIO bus without an 850 interface. It was introduced with the 1200XL at New York's Plaza Hotel in December 1982 at $549 and shipped around June 1983 as part of the matching XL peripheral range. Inside is an Okidata Microline 80 print mechanism — which is why accessories made for the Microline fit it — driven by Atari's own controller board.

It prints a 5×7 dot-matrix character set in three widths and supports a European character set, but it is purely a text printer: its escape codes cover character density, line width, line spacing and the European character set, with no bit-image graphics mode.

Specifications

Item Detail
Print method 5×7 dot-matrix impact
Widths Regular 10 cpi (80 columns); extended 5 cpi (40 columns); condensed 16.7 cpi (132 columns); short or long line widths selectable
Speed 40 characters per second at 10 cpi
Buffer One line (132 characters condensed, 80 at 10 cpi)
Paper Fan-fold, roll or single sheets
Characters ASCII plus European/international character set
Controller Intel 8051 microcontroller, 4 KiB external ROM, Intel 8155 RAM/I/O
SIO Answers to P1: ($40) and P3: ($42); XL OS device names P:, P1:, P3:
Connection 2 SIO ports, 3-ft SIO cable included
Power North America: 120 V AC built-in supply, 100 W; Europe: external adapter (29 V and 8.6 V AC). Not sold in the UK
Self test Enabled by moving an internal jumper

How it works

The 1025 speaks an extended form of the 820 printer protocol. The OS sends 40-byte chunks with the SIO Write command; the printer splices chunks together until it sees an EOL or the line is full, then prints the whole line — so a long BASIC LPRINT simply works. Escape codes at the start of a line change the format: ESC CTRL-T selects 16.5 cpi, ESC CTRL-O 10 cpi and ESC CTRL-N 5 cpi, ESC S and ESC L choose short (centred) or long line widths, and ESC 6 / ESC 8 set 6 or 8 lines per inch. These codes only work at the very start of a line, so densities cannot be mixed within one line.

10 LPRINT CHR$(27);CHR$(20);"CONDENSED TEXT AT 16.5 CPI"
20 LPRINT CHR$(27);CHR$(15);"BACK TO 10 CPI"

Reception

Word processors supported it widely — AtariWriter, for instance, offered a dedicated 1025 mode, and reviewers used that mode as a starting point for other printers too. In Antic's February 1986 survey of its online readers, the 1025 was the ninth most widely owned printer (4.1%), just behind the 1027, and earned an average rating of 3 out of 5; Antic noted that both Atari printers "were designed to sell for very low prices in their day, so naturally they run slower and offer less features than costlier printers." By early 1984 the U.S. price had fallen to $399, according to an Antic article on importing one into Canada.

Using it today / Known issues & tips

  • Tractor feed. A March 1987 Antic letter pointed out that because the 1025 is essentially a Microline 80, Okidata-compatible tractor units fit it.
  • Ribbons. Atari sold ribbon C061419; Microline 80 ribbons are the obvious alternative given the shared mechanism.
  • No graphics. Screen dumps and graphic printing programs need an Epson-compatible printer (or the later Atari XMM801).
  • Emulation. Altirra emulates the 1025, including its line-splicing behaviour.

Credits