Atari 1020 Color Printer/Plotter

Year
1983
Type
Peripheral
Category
Four-colour pen plotter (40-column roll paper)
Manufacturer
Atari, Inc. (ALPS mechanism, made in Japan)
Atari 1020 colour plotter with its roll-paper holder

Overview

The 1020 is not really a printer in the usual sense but a small XY pen plotter. Its print head carries four pens — black, blue, green and red — and moves left and right while the paper is driven forwards and backwards, so it can draw lines anywhere on the page. In its default text mode it writes characters with a vector font at 40 columns per line (switchable to 20 or 80); in graphics mode it accepts plotting commands such as move, draw, relative draw, axis drawing and text rotation. It connects directly to the SIO bus and works through the standard P: device.

Atari announced the 1020 with the 1200XL in December 1982 at $299 and shipped it around June 1983. The ALPS mechanism inside was also used in other small plotters of the period, including the Commodore 1520, Tandy/Radio Shack CGP-115, Sharp CE-150, Mattel Aquarius 4615 and Texas Instruments HX-1000.

Specifications

Item Detail
Type 4-colour pen plotter
Text modes 10 cpi / 40 columns (default), 5 cpi / 20 columns, 20 cpi / 80 columns; 64 character sizes; text rotation; international characters
Graphics commands Home, change colour, line type, draw, move, relative draw/move, initialise origin, axis drawing, alpha rotate
Plot range X 0–480, Y −999 to 999 (Antic, 1986)
Speed About 10 characters per second at 10 cpi
Paper Standard 40-column roll paper
SIO Answers as P1: ($40) and P4: ($43); XL OS names P:, P1:, P4:
Connection 2 SIO ports; 3-ft SIO cable included
Power 9 V AC (CA014748 or CA017964); 15 W
In the box Two pens of each colour; TX9032 cassette with Joystick Sketchpad and six sample graphics programs (Atari BASIC)
Self test Draws four squares, one per pen, at power-up

Using it from BASIC

Open the printer as an output channel, then send escape sequences or command strings. ESC ESC CTRL-G enters graphics mode; the command A returns to text. Pen colours are numbered 0 = black, 1 = blue, 2 = green, 3 = red.

10 OPEN #2,8,0,"P:"
20 PRINT #2;CHR$(27);CHR$(27);CHR$(7):REM GRAPHICS MODE
30 PRINT #2;"C1":REM BLUE PEN
40 PRINT #2;"M0,-100"
50 PRINT #2;"D450,-100":REM DRAW A LINE
60 PRINT #2;"H":REM HOME
70 PRINT #2;"A":REM BACK TO TEXT MODE
80 CLOSE #2

In text mode, ESC ESC CTRL-P, CTRL-N and CTRL-S select 20, 40 and 80 columns. Antic's "Mastering the Atari 1020 Plotter" (Kris Cruz, February 1986) is a good tutorial with four demonstration programs (sine curves, concentric circles, spiralling triangles) and notes that several commands can be sent in one PRINT separated by asterisks.

History

The 1020 belonged to the matching XL peripheral line introduced in 1983 alongside the 1010 recorder, 1025 printer and 1050 drive. By 1986 Antic was pointing out that pen plotting "until recently" cost upwards of $2,000, while a 1020 could be had for under $50 — cheap enough to buy just for program listings. Atari sold replacement pen sets (standard four-colour C061420-01 and all-black C061420-03) and paper rolls (C061533).

Using it today / Known issues & tips

  • Line splicing. Lines longer than 40 characters are assembled from successive SIO write commands until an EOL arrives, so 80-column text works through the normal P: device.
  • Character set. The 1020 uses the ATASCII international character set (except ESC); disabling international characters blanks a few codes.
  • Emulation. Altirra emulates the 1020 plotter, including customisable pen colours and on-screen rendering of the plotted output.

Credits