Digital Devices Ape-Face and U-Print Printer Interfaces
- Year
- 1984
- Type
- Interface
- Category
- SIO-to-Centronics printer interface cables and buffers
- Manufacturer
- Digital Devices Corporation (Atlanta, Georgia)
Overview
Atari's computers have no parallel printer port. Owners of Epson, Gemini, Prowriter and other Centronics printers needed either the 850 Interface Module or a cheaper third-party adapter. Ape-Face from Digital Devices Corporation of Atlanta was one of the best-known of these. It's a small box between two cables: SIO at one end, a 36-contact Centronics plug at the other. Antic's March 1984 New Products column listed it at $89.95, with a pun-filled pitch that it was "simple enough for a chimp to use". A reader's letter in Antic later that year described his budget system as "the Atari 800, Gemini 10X, Ape-face, and the Indus disk drive", which shows how it fitted into a typical setup.
Models
| Model | For | Notes |
|---|---|---|
| Ape-Face 48P | 400/800 | Original version |
| Ape-Face XLP | 400/800/XL/XE except 1200XL | Powered from SIO |
| Ape-Face 12XLP | 1200XL | Uses an external power supply |
| Ape-Face XLP-S | 400/800/XL/XE except 1200XL | Adds an SIO pass-through port |
| U-Print Model A | All | SIO pass-through; optional 16K buffer |
| U-Print A16 | All | 16K buffer (expandable to 32K), Copy and Reset buttons |
| U-Print A64 | All | 64K buffer, Copy and Reset buttons |
All end in a 36-contact Centronics ("miniature ribbon") plug that goes straight into the printer. Digital Devices also made the U-Call modem interface: SIO in, DB-25 to an RS-232 modem, with an R: handler and AMODEM Plus.
How it works
The interface answers the Atari's normal printer requests on the SIO bus, so programs that print through the standard P: device work unchanged. It then converts each character to parallel Centronics signals. Because the cheaper models take power from the SIO port, the 1200XL, whose SIO port doesn't supply that power, needed the separately powered 12XLP. The U-Print models' buffer RAM accepts a whole document quickly and frees the computer while the printer catches up. The Copy button reprints the buffer contents.
Using one today
- Ape-Faces are simple and robust, and still a practical way to connect a vintage Centronics dot-matrix printer.
- Check which model you have before connecting it to a 1200XL.
- Models without a pass-through port must be the last device on the SIO chain.
- Programs that send Atari graphics characters will print whatever the printer's character set maps them to. For ATASCII graphics you need a printer-specific driver, or an interface with a graphics mode such as the Xetec Graphix AT.
Credits
- Picture: Digital Devices' Ape-Face printer interface. — Photo from Gury's Atari 8-bit Forever portal (Ape-Face Interface) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current), section 4.6 (Digital Devices Ape-Face and U-Print models) and 5.1.3 (U-CALL) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 12 (March 1984), New Products: Ape-Face — AtariMagazines.com (Kevin Savetz), 1984
- Antic Vol. 3 No. 7 (1984), I/O Board letter (Atari 800, Gemini 10X, Ape-face, Indus) — Oliver Baczkowski, 1984
- Gury's Atari 8-bit Forever portal: Ape-Face Interface (Digital Devices, 1984) — Photo from Gury's Atari 8-bit Forever portal (Ape-Face Interface) (Unknown, used for identification), 1984
