Irata Verlag: High Speed Board, 512K RAMFloppy, Six-System Box and No Thrills
- Year
- 1985
- Type
- Vendor
- Category
- German Atari publisher and hardware maker with a U.S. branch
- Manufacturer
- Irata Verlag GmbH (West Germany); Irata Verlag USA (Colorado Springs)
Overview
Irata Verlag, a West German publisher whose name is "Atari" spelled backwards, made a run of hardware add-ons for the 8-bit Atari in the mid-1980s. By 1987 it also had a U.S. address: Irata Verlag USA, 1272B Potter Drive, Colorado Springs, from which Antic reviewed and listed several of its products. Its range centred on faster disk access, extra memory and a choice of operating systems for the XL and XE.
Products
| Product | Year | Notes |
|---|---|---|
| High Speed Board 1050 | 1985 | A clone of the Happy 1050 Enhancement for Atari's 1050 drive |
| High Chip XL | 1985 | Replacement XL OS adding buffered fast writes with verify over SIO, for use with the High Speed Board |
| High Chip XE mit RAMDisk | c.1985 | High Chip XL plus a RAM drive in the 130XE's banked memory |
| OldRunner Chip | c.1985 | A 400/800 OS "translator" in ROM, so old software runs on an XL/XE |
| 512K RAM 800XL RAMFloppy ("512K Board") | 1986 | Plugs into the 800XL's parallel bus to add a fast RAM disk, "like adding two drives to your system". $165 in Antic's July 1987 New Products. A matching 512K RAM BetriebsSystem Chip (OS chip) adds RAM-drive support |
| Six-System Box | 1987 | A switchbox for up to six OS chips in an XL or XE. Antic's July 1987 notice ($45) said it could turn an XL into an XE or 800 "operating format" or give an 80-column display, depending on the chips fitted. Antic reviewed it in August 1988 at $50 (details below) |
| No Thrills Interface | 1988 | $130; connects IBM-compatible or ST floppy drives to an 8-bit. See standard floppy drive interfaces |
| Video-Meister | 1987–88 | $15 software for Digital Vision's ComputerEyes digitizer: edit, combine and print digitized pictures |
| Soundmeister | 1986–87 | A sound digitizer advertised in Atari Magazin 2/87. It may have been released only for the ST |
The Six-System Box in detail
Charles Cherry reviewed the box for Antic in August 1988. It's a 5½ × 3 × 1-inch aluminium project box with a rotary switch and six LEDs on top. Inside, a circuit board holds sockets for the OS chips and a jumper cable that goes to the computer's OS socket. Fitting it is easy if the computer's OS ROM is socketed; otherwise he advised leaving it to a technician. He criticised the "rudimentary and somewhat confusing" instructions, which told you to drill a quarter-inch hole without saying why, and the short six-inch ribbon cable. On his 130XE it barely reached outside the case and got in the way of cartridges. Still, it worked without problems, and "if you want to use several OS chips, it's the only game in town". He listed Omnimon, Expander, Supermon and Omniview 80 among the chips owners might switch between. Atari's standard OS and CSS's UltraSpeed were his own pair.
Today
Most of what Irata's products did is now handled by modern boards: multi-OS flash switchers, Ultimate 1MB style memory and OS upgrades, and SD-based drive emulators. For other mid-1980s German makers see Compy-Shop. The Happy-compatible drive boards are covered under Happy 1050 enhancement.
Credits
- comp.sys.atari.8bit FAQ (Michael Current): 1050 upgrades, 6.10 sound digitizers, 6.12 memory, 7.1.2 OS versions (Irata Verlag entries) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 6 No. 3 (July 1987), New Products: Video Meister, 512K Board, Six-System Box — AtariMagazines.com (Kevin Savetz), 1987
- Antic Vol. 7 No. 4 (August 1988), 8-Bit Product Reviews: 6 System Box (Charles Cherry); New Products: No Thrills — AtariMagazines.com (Kevin Savetz), 1988
- Antic Vol. 7 No. 5 (September 1988), Video Title Shop review page: Video-Meister — AtariMagazines.com (Kevin Savetz), 1988
