ComputerEyes Video Digitizer

Year
1985
Type
Peripheral
Category
Video digitizer (slow-scan frame capture)
Manufacturer
Digital Vision, Inc., Needham, Massachusetts
ComputerEyes box, owner's manual and two software disks, above the black interface module with two joystick cables, Sync and Brightness knobs and a video input

Overview

ComputerEyes let an Atari 8-bit "see". It was a video digitizer from Digital Vision, Inc. of Needham, Massachusetts, already sold for the Apple II and Commodore 64 before the Atari version arrived in late 1985. A black box about the size of an Atari power supply takes a composite video signal from a camera, VCR, videodisc or TV, and connects to the computer through both joystick ports. The software builds a picture of whatever the camera is pointed at over a few seconds to a minute and a half. The result can be saved to disk, printed, or converted for paint programs. It cost $129.95, or $399.95 with a basic black-and-white camera.

Digital Vision's president Dave Pratt told Antic that Atari sales had taken off much faster than the Commodore and Apple versions had: "Atari users seem to be heavily into graphics and video."

Specifications

Item Value
Maker Digital Vision, Inc., Needham, Massachusetts
Released Late 1985 (Antic New Products, November 1985)
Price $129.95 (interface and software); $399.95 with b&w camera
Input Composite video, RCA jack
Connection Joystick ports 1 and 2
Controls Sync and Brightness knobs
Capture modes Five standard: three in Graphics 8 (320×192), two in ANTIC mode E (Graphics 7½); later Graphics 9 (80×192, 16 grey levels)
Capture time About 7 to 52 seconds (standard modes); about 90 seconds for Graphics 9
Computers 800/800XL/130XE with disk drive (48 KB)
Software Jim Bergman (Atari version)

History

Charles Jackson reviewed ComputerEyes in Antic's December 1985 "Video Star Atari" feature after the office spent "a week of obsession" photographing staff. Images saved as 62-sector picture files, and a video camera gave much better results than a VCR's freeze-frame. Pratt said newer 4-head and 8-head VCRs produced cleaner pauses. The 4- and 8-level captures gave "textured" images that printed well on dot-matrix printers.

Antic suggested converting captures to Micro Illustrator (KoalaPad) format with its Rapid Graphics Converter, fading between them with Fader II, or turning them into Print Shop graphics. A Bergman version that saved directly in KoalaPad format was in the works. Digital Vision then sold the Graphics 9 Mode Compatibility Software (about $15), which added a 16-level grey-scale capture. It takes 15 scans at different brightness thresholds and merges them into one Graphics 9 image.

How it works

A video frame carries far more data than the Atari could read in real time, so ComputerEyes works as a slow-scan digitizer. It samples one point per scan line, moving one column to the right every frame. A 320-column bi-level picture therefore takes 320 frames, about 5.3 seconds at 60 Hz, and the subject has to hold still throughout.

Everything goes through the joystick lines:

  • Port 1, right (PORTA bit 7): sync detect. The box stretches the horizontal sync pulses so the 6502 can see them, and the software tells vertical from horizontal sync by pulse length.
  • Port 1, left (bit 6): the video level, high if the sample is brighter than the threshold.
  • Port 1, down (bit 5): an output that starts the sweep.
  • Port 2 (bits 0-3): four outputs setting one of 16 brightness thresholds, relative to the manual Brightness knob.

The box itself steps the sampling delay after each sync pulse, so sweep speed isn't under software control. That also introduces a slight skew down each column. Grey-scale images come from repeated passes at different thresholds: 1, 3, 7 or 15 passes give 2, 4, 8 or 16 levels. A full 16-level capture takes about 85 seconds.

Using it today

  • Use a steady source. A camera on a tripod, a DVD player's still frame or a composite output from a modern device all work far better than an old VCR pause.
  • Adjust Brightness first. The multi-pass modes depend on the knob setting, so set it before a long capture, as Digital Vision advised.
  • Documentation. The Altirra Hardware Reference Manual documents the port protocol in detail, which is useful if you want to write your own capture software or build a modern replacement.

Compatibility

Needs both joystick ports, so on a 400/800 any other controller-port device in ports 1 and 2 must come out. Images save as standard Graphics 8/7½/9 screens and can be converted to KoalaPad/Micro Illustrator format for paint programs.

Credits